Motorola MTH800 manual Security, PIN Protect

Security

From the main menu, select > Security.
		Security
PIN Protect
		PIN Protect
Network access protection is configured by		Change Code
		Keylock
your Service Provider:		AirEncrypt
		K Validity
• No access to network operation — you can	Select		Back
only send or receive Emergency Calls and

adjust the volume level. Unit lock takes effect at the next power on.

To protect access to network operation:

1.From the main menu, select > Security > PIN Protect. On is highlighted.

2.Press Select.

3.At the Code? prompt enter the 4-digit code (factory setting 0000). To avoid disclosure of the code, asterisks are dis- played instead of the code digits. The display will show the following message:

Unit Locked—you entered the correct code. The display returns to the Security sub-menu and shows the active setting: On.

To unlock the MTH800 before powering off:

1.From the main menu, select > Security > PIN Protect. Off is highlighted.

2.Press Select.

3.At the Code? prompt enter the 4-digit code.The display will show the following message:

Unit Unlocked—you entered the correct code. The display returns to the Security sub-menu and shows the active setting: Off.

To unlock the MTH800 after powering on, enter the code at the prompt. The MTH800 enters the Home display.

If you fail to enter the correct code, the following message will be displayed:

The Menu

77