Motorola MTH800 Entering GPS Location Service, Viewing Your Position, Select More... Location

Entering GPS Location Service

To enter the GPS sub-menu, press	E	and
	M NU		Location
select More...> Location:
			Position
• Position provides the actual position infor-			Interface
			Testpage
mation.			Select Back
• Interface allows you to enable/disable the
GPS location service.

•Testpage provides the actual satellite information. Scroll to your selection and press Select to access the next display.

This estimate of accuracy of the calculated location is only a very rough estimate and may vary substantially from the actual accuracy of the approximate location information reported.

•The variation will vary in accordance to the GPS Configuration set by your Service Provider.

•The availability of the GPS Location menus is dependent on your termi- nal configuration, please contact your Service Provider for further details.

Viewing Your Position

1.From the main menu, press MENU and se- lect More...> Location > Position.

2.Scroll to view the entire screen.

Position
<Time>
<Latitude>
<Longitude>
<Altitude>
<Tracked satellites>
Rfrsh	Back

This displays the following information about

the last time your location was calculated (if available):

•The time the location was last calculated

•The latitude expressed in degrees, minutes, and seconds

•The longitude expressed in degrees, minutes, and sec- onds

•The altitude expressed in meters

•The number of satellites used to calculate the location. In general, more satellites make for better accuracy. The

maximum is twelve satellites.

To calculate your location again, press Rfrsh.

64