Motorola MTH800 manual Local Area Service, Muting/Unmuting the Bottom Microphone

Muting/Unmuting the Bottom Microphone

During a Phone, PABX, or full-duplex Private Call, use the mute feature to:

•hold conversation without being heard by the caller

•silence possible background noise in your area.

1.Press Mute. The display shows Mute is ON. The microphone is muted. You can hear the incoming audio, but the caller cannot hear any speech coming from your MTH800.

2.To speak, press Unmut. The display shows Mute is OFF. The microphone is on.

Local Area Service

This mode, also called Fallback Mode, allows more than one terminal from the same site to communicate when the link between the site and network central controller fails. Entering and exiting Local Area Service (that is, returning to System Wide Services) is done automatically.

Entering Local Area Service

When the MTH800 receives a Local Area Service indication from the system, the following occurs:

•The MTH800 sounds a tone.

•The display shows the “Local Area Service” message.

•Display icons and soft keys turn brown.

•Any call in progress is dropped upon entering Local Area

Service mode.

If configured by your Service Provider, this message/alert is periodically repeated to remind you that the MTH800 is still operating in Local Area Service mode.

The following features are available while the MTH800 is in Local Area Service:

•Registration

•Attachment

•Group Call

•Emergency Call

•Emergency Alarm

30