Motorola MTH800 manual Making a Private Call

Private Call

General

A Private Call, also called Point-to-Point or individual call, is a call between two individuals. No other terminal can hear the conversation. This call can be a full-duplex call (if the system allows) instead of the standard half-duplex call. In a full- duplex call, both participants can speak at the same time, while in a half-duplex call, only one person can speak at a time.

For operating the MTH800 in RF sensitive areas, see “Trans- mit Inhibit” on page 39.

While Transmit Inhibit is activated, an incoming Private Call is indi- cated, but it is not possible to answer the call.

Dual Microphone Feature

See “How to Hold Your MTH800” on page 13.

Making a Private Call

If you are in an on-going Group Call and wish to make a new call,

press to ignore the current call. Dial the number.

1.From the Home display dial a number.

2.If Private is not the first type of call pre- sented, press CType to select the Private Call type.

3.For a half-duplexcall, press and release the PTT button. You will hear a ringing tone. Wait for the called person to answer your call. (This is also called a hook setup.) OR,

Private #:
	2234
Ctype	Delete

Private Call

Press and hold PTT. Wait for the talk permit tone (if configured) before talking, and release the PTT when listening. (This is also called a direct setup.)

47