HP 10BT NightDIRER/100 manual Connecting to a Network, Checking the Installation, Remote Wake Up

1Installing the HP LAN Card

Connecting to a Network

Remote Wake Up

(RWU) and Remote

Power On (RPO)

Connecting to a Network

Connect the network cable to the RJ-45 UTP (Unshielded Twisted Pair) LAN connector. The LAN card supports both 10 Mbits/s and 100 Mbits/s operation.

10BT/100TX

Connector

The HP LAN card has the ability to power up the PC upon receipt of a special sequence (known as a Magic PacketTM) from the network.

The RWU mode allows the PC to resume normal functioning when it is in sleep (suspend) mode.

The RPO mode allows the PC to start when it is switched off.

Checking the Installation

Test whether the HP LAN card functions on the network by finding another network device or performing a network operation. If it does not work correctly, refer to “Troubleshooting” on page 12.

English 11

19