CAUTION
1 Installing the HP LAN Card
Pre-installation Procedure
Perform the
Pre-installation on a Windows 95 System
1With Windows 95 running, insert the HP LAN Setup diskette into the diskette drive.
2Click Start, and then Run.... The Run dialog box opens.
3In the command line, type a:\setup and click OK. A network setup dialog box opens.
4Click Next. A second network setup dialog box opens.
5Click Finish. The PC reboots under DOS and displays a message asking you whether there is another LAN card already installed.
6Type n, then remove the HP LAN Setup diskette from the diskette drive and turn off the PC.
7Now go to “Installing the HP LAN Card” on page 8.
Pre-installation on a Windows NT 4.0 System
1With Windows NT running, insert the HP LAN Setup diskette into the diskette drive.
2Click Start, then Run....
3In the command line, type a:\setup and click OK. An account information dialog box opens.
4Enter the name of an account which is a member of the administrator group, and the corresponding password. If you are already logged on with administrator’s rights, the field for the account name is automatically filled in with your account name.
5Click Next. A dialog box is displayed.
6English
14