Roland RD-700 owner manual 108, 15 ST.FLANGER Stereo Flanger, Step Flanger, Stereo Delay

Appendices

Effect/Parameter List

Balance (Effect Balance) #

Adjust the volume balance between the direct sound and the chorus sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the chorus sound will be output.

Level (Output Level)

Adjust the output level.

15: ST.FLANGER (Stereo Flanger)

This is a stereo flanger. (The LFO has the same phase for left and right.) It produces a metallic resonance that rises and falls like a jet airplane taking off or landing. A filter is provided so that you can adjust the timbre of the flanged sound.

Pre Delay (Pre Delay Time)

Adjust the time delay from when the direct sound begins until the flanger sound is heard.

Rate #

Adjust the rate of modulation.

Depth

Adjust the depth of modulation.

Feedback (Feedback Level) #

Adjust the proportion (%) of the processed sound that is returned (fed back) into the input. Positive (+) settings will return the sound in phase, and negative (-) settings will return the sound in reverse phase.

The effect becomes more prominent as the value is increased.

Phase

Adjust the spatial spread of the sound.

Filter (Filter Type)

Select the type of filter.

OFF: a filter will not be used

LPF: cut the frequency range above the cutoff frequency

HPF: cut the frequency range below the cutoff frequency

Cutoff (Cutoff Frequency)

Adjust the basic frequency of the filter.

Low Gain

Adjust the gain of the low frequency range.

Positive (+) settings will emphasize (boost) the low frequency range.

High Gain

Adjust the gain of the high frequency range.

Positive (+) settings will emphasize (boost) the high frequency range.

Balance (Effect Balance)

Adjust the volume balance between the direct sound and the flanger sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the flanger sound will be output.

Level (Output Level)

Adjust the output level.

16: STEP FLANGER

The Step Flanger effect is a flanger in which the flanger pitch changes in steps.

Pre Delay (Pre Delay Time)

Adjust the time delay from when the direct sound begins until the flanger sound is heard.

Rate

Adjust the rate of modulation.

Depth

Adjust the depth of modulation.

Feedback (Feedback Level) #

Adjust the proportion (%) of the flanger sound that is returned (fed back) into the input. Negative (-) settings will invert the phase.

The effect becomes more prominent as the value is increased.

Phase

Adjust the spatial spread of the sound.

Step Rate #

Adjust the rate (period) of pitch change.

➔Step Rate parameter can be set as a note-value of a tempo. In this case, specify the value of the desired note.

Low Gain

Adjust the gain of the low frequency range.

Positive (+) settings will emphasize (boost) the low frequency range.

High Gain

Adjust the gain of the high frequency range.

Positive (+) settings will emphasize (boost) the high frequency range.

Balance (Effect Balance)

Adjust the volume balance between the direct sound and the flanger sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the chorus sound will be output.

Level (Output Level)

Adjust the output level.

17: STEREO DELAY

Delay L (Delay Time Left)

Adjust the time from the direct sound until when the left delay sound is heard.

Delay R (Delay Time Right)

Adjust the time from the direct sound until when the right delay sound is heard.

Feedback (Feedback Level) #

Adjust the proportion (%) of the delay sound that is fed back into the effect. Negative (-) settings will invert the phase.

108