Honeywell L5100 manual Start of Entry Delay Chime Kissoff Bypass System Low Battery

USER FUNCTIONS

Automation
Ready To Arm
Name	01
Type	Action
Trigger Output	None
Start Zone Type	Stop Zone Type
Not Used	Not Used
Start System Operation	Stop System Operation
Not Used	Save
	Not Used
	5000-100-189-V0
	OR

Ready To Arm
Name	Scene
Type	Action
Scene	None
Zone Type Fault	Zone Type Restore
Not Used	Not Used
System Operation 1	System Operation 2
Not Used	Save
	Not Used
	5100-100-071-V0

9.Select “Stop Zone Type” or “Zone Type Restore” (if “Scene” was selected in Type field). The system displays the same options as the

previous step.

Note: If a Rule is being used to trigger a Z-Wave door lock, when the system is Armed Stay or Armed Away, it is recommended that “End of Exit Delay” be selected for System Operation 1 or System Operation 2.

10.Select “Start System Operation” or “System Operation 1” (if “Scene” was selected in Type

field). The following options are displayed:

Not Used	Arm Stay
Arm Away	Disarm
Any Burglary Alarm	Any Fire Alarm
Bell Timeout	End of Exit Delay

Use the “S” “T” buttons to scroll to second page of zone type options.

Start of Entry Delay	Chime
Kissoff	Bypass
System Low Battery	Reporter Failure
Duress Alarm

11.Select “Stop System Operation” or “System Operation 2” (if “Scene” was selected in Type field). The system displays the same options as step 10.

Ready To Arm

Zone Number Operation

Not Used

Save

5000-100-191-V0

12.Select “Zone Number Operation”. The system toggles between the following options:

Not Used Fault Trouble

Alarm

Notes: 1. For Fault, the following zone types should not be used: General Monitor, General Response, Resident Monitor, and Resident Response.

2.When a zone has been deleted, please verify the programming selection for Zone Number Operation.

If Trouble, Fault or Alarm is selected, the system displays several new options. Proceed to Step 13.

– 50 –