Honeywell L5100 manual WiFi Configuration, Manually Configure Access Point, User Functions

USER FUNCTIONS

Manually Configure Access Point

Ready To Arm

Users	Events	Test	Keypad
Date Time	Reminders	Slide Show	WiFi Config
			Back
			5100-100-006-V0
	Ready To Arm
	Scan Access Points
	Manual Configure AP
			5100-100-032-V0

	System Programming...
	SSID Name
	Toms_net
Security	Network Type
WPA1	Infrastructure
	Key
	* * * *
Join	Save
	5100-100-086-V0

WiFi Configuration

1.At the Master User screen select the WiFi Config icon. The system displays the WiFi options screen.

2.Select the “Manually Configure AP” button to view the available networks. The WiFi enrollment screen is displayed.

3.Select the “SSID Name” button and enter Network name on the displayed keypad.

4.Select the “Security” button and select from “Open”, “WPA1, “WPA2” and “WEP”. The network information is displayed. If a password is required, select the “Key” button and enter the password.

Note: When configuring for WEP encryption key on the access point, always use hexa-decimal type as the input method on the panel. The input key should contain characters such as 0-9 and A-F.

4.Select the “Join” button. A confirmation screen will be displayed. Select “OK”, then select “Save” to confirm the selection.

5.Select the “2” button as required to return to the Master User screen.

– 63 –