Honeywell L5100 manual Clock/Calendar, Setting the Date and Time

USER FUNCTIONS

Clock/Calendar

Note: If your system is equipped with a GSMVLP5 or ILP5 Communication Module, the time and date will be programmed and updated automatically via Central Station. You may still program the correct Time Zone as shown below. Check with your installer to see if your system is equipped with a Communications Module.

Setting the Date and Time

Ready To Arm

				Tools
Arm Away	Arm Stay	Dashboard		Settings
Delay	10:18 AM June 8, 2010			Back
				5100-100-003-V0
	Ready To Arm
Program the system		1	2	3
Enter Code:		4	5	6
		7	8	9
	Cancel	Clear	0
				5000-100-009-V0

Note: The system must be disarmed in order to set the date and time.

1.With the system in the disarmed state, select the “Tools” icon from the second page of the Home Screen. The system displays the Keypad screen.

2.Enter your 4-digit Master User Code. The system displays the Master User programming screen.

Ready To Arm

Users	Events	Test	Keypad
Date Time	Reminders	Slide Show	WiFi Config
			Back
			5100-100-006-V0

3.Select the “Date Time” icon. The Calendar screen will appear.

– 44 –