SECURING THE PREMISES
Chime Mode
Chime Mode
Your system can be set to provide you with an audible alert of the opening of a door, while it is disarmed, by using Chime mode. When activated, three beeps will sound at the control whenever a protected perimeter door is opened and the zone voice descriptor will be announced, if programmed. Additionally, the faulted zone information will be displayed on the home screen. Selecting the “Zones” icon displays the open protection points. The Chime mode can be turned on only when the system is disarmed.
Turning Chime Mode On or Off
Ready To Arm
|
|
| Tools |
Arm Away | Arm Stay | Dashboard | Settings |
Delay | 10:18 AM June 8, 2010 | Back | |
Ready To Arm
Brightness |
|
|
|
Contrast |
|
|
|
Volume |
|
| Clean |
|
|
| |
Voice | Chime | Ringer | Save |
|
|
|
1.With the system in the disarmed or armed state, select the “Settings” icon from the second page of the Home Screen. The system displays the Settings screen.
2.Select the “Chime” icon. The system toggles between “Off” and “On”. When “On” is selected, the Chime mode will be active.
3.Select the “Save” button to save your new settings.
