
USER FUNCTIONS
Ready To Arm | |
Zone Number Operation | |
Fault | |
First Start Zone | First Stop Zone |
Disabled | Disabled |
Second Start Zone | Second Stop Zone |
Disabled | Disabled |
Third Start Zone | Third Stop Zone |
Disabled | Save |
Disabled | |
| |
| OR |
Ready To Arm | |
Zone Number Operation | |
Fault | |
First Zone Fault | First Zone Restore |
Disabled | Disabled |
Second Zone Fault | Second Zone Restore |
Disabled | Disabled |
Third Zone Fault | Third Zone Restore |
Disabled | Save |
Disabled | |
|
Automation
13.Select the First, Second or Third “Start Zone” or “Zone Fault” (The name of this field is dependant upon the “Type” that was selected in Step 6.) Select the Zone from the list displayed by the system.
14.Select the First, Second or Third “Stop Zone” or “Restore Zone” (The name of this field is dependant upon the “Type” that was selected in Step 6.) Select the Zone from the list displayed by the system.
15.Select “Save” when programming is complete.
16.Select the “2” button. The system returns to the Automation programming screen.
Editing or Deleting Rules
| Ready To Arm |
Device 1 | Device 2 |
System Armed | New |
Follow Me | |
Device 3 | Device 4 |
New | New |
Device 5 | Device 6 |
New | New |
Edit | Delete |
|
Ready To Arm | |
Name | 01 |
System Armed |
|
Type | Action |
Message to phone 1 | Send |
Start Zone Type | Stop Zone Type |
Not Used | Not Used |
Start System Operation | Stop System Operation |
Armed Stay | Save |
Disarm | |
|
1.At the Rules Programming Screen, select the Rule that you wish to edit or delete.
Note: Rules
2.To delete the rule, select the Delete button. To edit the rule select the Edit button and proceed to step 3.
3.Select the field that you wish to edit and follow the steps as outlined in the Programming Rules procedure.
– 51 –