Honeywell L5100 SYSTEM FUNCTIONS Maintaining your system, Routine Care, Cleaning the Touch screen

SYSTEM FUNCTIONS

Maintaining your system

The components of your security system are designed to be as maintenance-free as possible. To make sure that your system is in working condition, do the following:

1.Test your system weekly (see the TESTING THE SYSTEM section).

2.Test your system after any alarm occurs (see the TESTING THE SYSTEM section).

3.Clean the touch screen weekly.

Routine Care

•Treat the components of your security system as you would any other electrical equipment. Do not slam sensor-protected doors or windows.

•Keep dust from accumulating on the touch screen and all protective sensors, particularly on motion sensors and smoke detectors.

•The touch screen and sensors should be cleaned carefully with a dry soft cloth. Do not spray water or any other fluid on the units.

Cleaning the Touch screen

Ready To Arm

			72
		Zones	Automation
Arm Away	Arm Stay	Message	Phone
Delay	10:18 AM June 8, 2010		More

5000-100-006-V1

Ready To Arm

Brightness
Contrast
Volume			Clean
Voice	Chime	Ringer	Save
			5100-100-088-V0

1.With the system in the disarmed or armed state, select the “Settings” icon from the second page of the Home Screen. The system displays the Settings” screen.

2.Select the “Clean” icon. The touch screen become inactive for a period of 15 seconds. A box displays “Please Use A Damp, Soft Cloth Touch Screen Will Be Disabled For 15 Seconds” and the time will count down.

3.After 15 seconds the screen returns to the settings screen and becomes active.

Note: If any user notification events occur while the screen cleaning mode is active and the system is armed, the mode will be canceled and the system will operate normally. If certain user notification events occur (i.e.; motion or silent alarm) while the screen cleaning mode is active and the system is disarmed the mode will not be canceled.

– 77 –