Honeywell L5100 manual Arming the System with no delay Instant, Quick Exit

SECURING THE PREMISES

Arming the System

Arming the System with no delay (Instant)

Use “Instant” with Stay mode when you are staying home and do not expect anyone to use the entrance door. Use “Instant” with Away mode when the premises will be vacant for extended periods of time such as vacations, etc. When armed with “Instant”, the system will sound an alarm if a protected door or window is opened, including the entrance door. You may leave through the entrance door during the exit delay period without causing an alarm, but an alarm will sound as soon as someone reenters.

When armed “Instant” with Stay mode, the control beeps three times and displays the “Armed Stay Instant” message. In addition, the red Armed indicator lights and the system announces “Armed Stay Instant –exit now”.

When armed “Instant” with Away mode, the control beeps two times and displays the “Armed Away Instant” message. If Exit Warning is enabled the system beeps continuously for the duration of the exit delay. In addition, the red Armed indicator lights and the system announces “Armed Away Instant –exit now”.

To Arm the System with No Delay (Instant)

Ready To Arm

			72
		Zones	Automation
Arm Away	Arm Stay	Message	Phone
Delay	10:18 AM June 8, 2010		More

1.Select the “Delay” tab on the home screen. The icon “toggles” and “Instant” is displayed.

2.Arm the system in the “Stay” or Away” mode normally.

Note: The entry delay time is eliminated when “Instant” is selected.

5000-100-006-V1

Quick Exit

If active, you can restart the exit delay at any time after arming has been armed in Stay or Away mode by selecting the “Quick Exit” icon. This avoids having the user disarm then re- arm the system after allowing someone to enter or exit. The system will re-arm once the exit delay expires.

Armed Stay

			72
		Zones	Automation
Disarm	Quick Exit	Message	Phone
	10:18 AM June 8, 2010		More

1.Select the “Quick Exit” icon to restart the exit delay.

Note: Quick Exit is active in Away mode when: Auto Stay mode is enabled and no entry/exit zone has been faulted during the exit delay period.

5000-100-060-V1

– 23 –