Honeywell L5100 manual Playing Messages, Deleting Messages

USER FUNCTIONS

Message Recording and Playback

		Ready To Arm
Message 1	2:48 PM	September 1, 2010
Message 2	5:09 PM	September 5, 2010
Add New		Play	Delete All
			5000-100-046-V0

6.When you have finished recording, select “2”. The system displays the recorded messages.

7.To record additional messages (if recording time is available) repeat steps 1 through 3.

NOTE: If you are trying to record a new message and the message center is already full, “Add New” will not be displayed. If the message center is full all old messages must be deleted before new messages can be recorded. See the Deleting Messages section.

Playing Message(s)

		Ready To Arm
Message 1	2:48 PM	September 1, 2010
Message 2	5:09 PM	September 5, 2010
Add New		Play	Delete All
			5000-100-046-V0

Deleting Messages

		Ready To Arm
Message 1	2:48 PM	September 1, 2010
Message 2	5:09 PM	September 5, 2010
Add New		Play	Delete All
			5000-100-046-V0

1.At the Message screen, select the message you wish to play.

2.Select “Play”, the system plays your message.

3.When you are finished listening to the message, you may select. “Stop”. If “Stop” is not selected the system continues to play the remaining messages.

4.When you have finished listening to the messages, select “2”. The system returns to the Home Screen.

1.At the Message screen, select “Delete All”. The system deletes all messages.

2.When you have finished deleting the messages, select “2”. The system returns to the Home Screen.

– 42 –