Honeywell L5100 manual USER FUNCTIONS Message Recording and Playback, Entering Message Mode

USER FUNCTIONS

Message Recording and Playback

The LYNX Touch Message Center allows you to record, play and delete messages. The maximum message duration is 184 seconds.

NOTES: (1) If the system loses electrical power, all messages will be erased.

(2) Message Play/Record will not be available if a report must be sent.

Entering Message Mode

Ready To Arm

			72
		Zones	Automation
Arm Away	Arm Stay	Message	Phone
Delay	10:18 AM June 8, 2010		More

5000-100-006-V1

Recording a Message

	Ready To Arm
No items to display!
Add New	Play	Delete All	Save
			5000-100-045-V0

	Ready To Arm
Message 1		Stopped
Time Remaining : 184 Seconds
Record	Play	Delete
		5000-100-047-V0

1.With the system in the disarmed state, select the “Message” icon from the Home Screen. The system displays the Message screen.

1.Select “Add New”. The system displays the Record Message screen.

Note: The System will display the total message recording time available.

2.Select “Record”, the system sounds a single tone. Speak into the microphone and record your message.

3.When you are finished recording your message, select. “Stop”

4.To listen to the message, select “Play”.

5.If you wish to delete the message, select “Delete”.

6.Record additional messages as required.

– 41 –