Honeywell L5100 manual Quick View of System Functions, Security Functions

	SYSTEM OVERVIEW
	Quick View of System Functions
SECURITY FUNCTIONS
Check System status:	Select “System” icon.
To arm in STAY mode:	Select “Arm Stay” icon then enter Code.
To restart exit delay:	Select “Restart Exit Delay” icon.
To arm in AWAY mode:	Select “Arm Away” icon or depress “Away” key then
	enter Code.
To arm INSTANT:	Set “Delay” to ”Instant” . Select “Arm Stay” or “Arm
	Away” icon or “Away” key then enter code.
To arm if Quick Arm* is active:	Select “Arm Stay” or “Arm Away” icon or “Away” key
	followed by Quick Arm tab on the touch screen.
* User code is not required if Quick Arm is active.
To disarm system and silence alarms:	Depress “Off’” key or “Disarm” icon and enter Code*

*During Entry Delay or when an Alarm Condition exists, the LYNX Touch can be disarmed by entering the User Code. Entering the OFF key is not required

To bypass a zone(s):	Select “Zones” icon
To turn Chime mode on or off:	Select “Settings” icon

MESSAGE CENTER

To record a message: ................................................. Select “Message” icon

VOLUME ADJUSTMENT

To adjust volume:	Select “Settings” icon
To restore/unmute user announcements:	Select “Settings” icon

SPEAKER PHONE OPERATION

To enter speaker phone mode:	Select “Phone” icon
To enable/disable (toggle) ringer:	Select “Settings” icon
OTHER FUNCTIONS (accessible to the Master User only)
To set the time and date:	Select “Date Time” icon (on Master User Menu)
To set scheduling:	Select “Schedules” icon (on Automation Menu)
To activate/deactivate devices:	Select “Rules” icon (on Automation Menu)
To add/delete a user code* (except Master Code):	Select “Users” icon (on Master User Menu)
* Only the master code can be used to add or delete another user code.
To turn Test mode On or Off:	Select “Test” icon (on Master User Menu)
To view system events:	Select “Events” icon (on Master User Menu)
To program or delete “Follow Me” Reminders:	Select “Reminders” icon (on Master User Menu)

– 9 –