Roland RD-700 owner manual Changing Tone Elements, Setting the Transposition for Each

Using the RD-700 As a Master Keyboard

	transmitted (p. 62).				Changing Tone Elements
	Setting the Transposition for Each				(ATK/REL/COF/RES)
					You can make changes in tones by adjusting the settings of
	Individual Part (Key Transpose)				the following four elements.
	You can perform with each part transposed to a different				ATK (Attack Time):
	pitch.				The time it takes after the key is pressed for a sound to reach
	When the Keyboard Mode is Layer, you can create a richer				full volume.
	sound by setting the two Tones to different octaves. Also, if				REL (Release Time):
	the Keyboard Mode is set to Split and you are playing a bass
					The time it takes after the key is released for a sound to
	Tone in the lower Part, you can use the Key Shift function to
					become inaudible.
	play the bass at a lower pitch.
					COF (Cutoff):
					Adjusts how much the filter is opened.
	Parameter			Value
					RES (Resonance):
	TRA (Transpose)		-48 – 0 –+48
					This boosts the portions in the region around the cutoff
	Setting the Range for the Change in				frequency, lending a particular quality to the sound.
					Excessively high settings can produce oscillation, causing the
	Pitch with the Bender (Bend Range)
					sound to distort.
	This sets the amount of pitch change that will occur when
	you move the Pitch Bend lever (+/- 4 octaves).
					Parameter	TX CC#	Value	Description
								Higher values pro-
	Parameter	RPN		Value
								duce a milder attack;
					ATK	CC73	-63– +63	lower values pro-
	B.R (Bend Range)	00H/00H		0–48
								duce a sharper at-
								tack.
Keyboard								Higher values pro-
					REL	CC73	-63– +63	duce longer decay;
								set lower values for a
								clear-cut sound.
Master								Higher values
								brighten the sound;
					COF	CC74	-63–+63	lower values make
								the sound seem dark-
								er.
								Higher value makes
								the special quality of
					RES	CC71	-63–+63	the sound stronger;
								lower value reduce
								these characteristics.

64