Roland RD-700 Applying Effects to the Sound, When Using Multi-effects in Split or Layer Mode

Using the Convenient Functions in Performances

Applying Effects to the Sound

(MULTI EFFECTS)

In addition to chorus (p. 47) and reverb (p. 47), the RD-700 also allows you

to apply “multi-effects” to sounds. Multi-effects provides a collection of 65	For further details on the
	onboard effects, see the
different effects, such as distortion and rotary, from which you can choose.
	“Effect/Parameter List”
The factory settings have a suitable effect assigned to each of the tones.
	(p. 104).
fig.panel

CONTROL

1,2,3

1

Press MULTI EFFECTS [ON/OFF], getting its indicator to light.

2

Adjust the amount of multi-effect applied with the [CONTROL] knob.

3

To cancel the multi-effect, press MULTI EFFECTS [ON/OFF], the indicator light goes out.

When Using Multi-effects in Split or Layer Mode

The RD-700 cannot use more than one multi-effect at a time. Therefore, there is a “Source” parameter for whatever multi-effects settings you select, and a “Dest.” parameter for the part to which those settings are to be applied.

Thus, you should note that depending on the Source or Dest. settings, some Parts may not have multi-effects applied while in Split or Layer mode.

For more detailed information, refer to “MFX Source, MFX Dest” (p. 77).

The allowable values adjusted with the [CONTROL] knob vary with the selected effect. For details, refer to “MFX Control” (p. 77).

NOTE

Effects are not applied to Tones for which the Tone Edit MFX settings in Edit mode are set to “00 THROUGH” (p. 80). In that case, the MULTI EFFECTS [ON/OFF] indicator will blink.

Convenient Functions

You can change the multi-effects type as well as a variety of other multi- effects settings. For details, refer to “Making Multi-Effects Settings” (p. 77).

53