Roland RD-700 Setting the Change in Volume, According to the Force Used to, Play the Keyboard

Edit Mode

Detailed Settings for Each Function ([EDIT])

6. When you have finished making the settings, press		Setting the Change in Volume
[EDIT], extinguishing its indicator.		According to the Force Used to
You are returned to the Tone screen.
		Play the Keyboard
Selecting the Part to Be Set		(Velocity Sens/Max)
		This setting determines how the volume changes in response
(<Local Part>)
		to the force used to play the keyboard (velocity) and the
Choose the Local Part for which you want to make settings.		maximum value of the change.
You can select the Local part by using the PART SELECT		NOTE
buttons.
		This setting is disregarded with certain tones.
Parameter	Value
			Parameter		Value		Description
<Local Part>	UPPER1, UPPER2, LOWER
						This setting determines how
						the volume changes in re-
						sponse to the velocity. The
Setting the Key Range for Each						volume is increased as the
						keyboard is played with
Part (Key Range)					-63–	greater force when a positive
		Velocity Sens				Value is used; when a nega-
When [SPLIT] is pressed in normal performance conditions,					+63	tive value is selected, the vol-
the key range is divided at the Split Point, and you can play						ume decreases as the keys are
						played with greater force. If
with two different tones on one keyboard.
						this is set to “0,” the volume
Using Key Range allows you to make even more detailed key						will not be affected by the
range settings.						strength of your playing on
						the keyboard.
This sets the lower and upper limit of the key range in each
						This is the maximum value
part.
After moving the cursor to the parameter to be set, you can						for the change in volume oc-
						curring in response to the ve-
make the setting by pressing the designated key and
		Velocity Max			1–127	locity. Lowering this value
[ENTER].						will produce softer notes
						even if you play the key-
						board strongly.
Parameter	Value
		Setting the Transposition for Each
Key Range	A0–C8
		Individual Part (Key Transpose)
NOTE
This is effective only when [SPLIT] is on (p. 43) in the key		You can perform with each part transposed to a different
range settings.		pitch.
NOTE		When the Keyboard Mode is Layer, you can create a richer
		sound by setting the two Tones to different octaves. Also, if
You cannot set the key range’s lower limit higher than the		the Keyboard Mode is set to Split and you are playing a bass
upper limit, nor can you set the upper limit below the lower		Tone in the lower Part, you can use the Key Shift function to
limit.		play the bass at a lower pitch.
				Parameter			Value
		Key Transpose					-48–0–+48
		You can also set the same degree of transposition for all parts
		with [Transpose]. For details, refer to “Transposing the Key
		of the Keyboard ([TRANSPOSE])” (p. 46).

88