Turning the Power On and Off, Turning On the Power | Roland RD-700

Getting Ready

Turning the Power On and Off

Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

Turning On the Power

1	Before you switch on the power, turn the volume down all the

way by rotating the VOLUME Slider.

Also completely turn down the volume of any connected audio device and other equipment.

fig.00-06

Getting Ready

2	Press the upper portion of the [POWER] switch to turn on the

	power.
	The unit is powered up, and the display's backlighting comes on.
	fig.00-07

3	Turn on the power to connected external devices.

4	Adjust the volume of the connected external device.

5	Adjust the RD-700’s volume to obtain the proper volume level.

NOTE

To prevent incorrect functioning of the Pitch Bend Lever (p. 48), refrain from touching the lever while the power to the RD- 700 is turned on.

NOTE

This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

24

Image 24

Roland RD-700 owner manual Turning the Power On and Off, Turning On the Power

Contents

Page Important Safety Instructions 001 002b Protect the unit from strong impact. Do not drop it Power Supply PlacementMaintenance Additional Precautions Main Features Convention Used in This Manual Contents Contents Using the Convenient Functions in PerformancesUsing the RD-700 As a Master Keyboard Making Detailed Settings for the Piano Tones Piano Edit Contents Detailed Settings for Each Function Edit Connecting External Midi Devices Keyboard Part and Controllers Settings Local Part ParamSetting Midi Receive Parts Internal Part Prm Making Arpeggio Settings Arpeggio Appendices General Midi Panel Descriptions Front Panel Display Function 11 DEC/NO, INC/YES/ENTERExpansion A, B Rear Panel Installing the Wave Expansion Board Getting Ready Installing SRX Series Boards Getting Ready Use the Installation Tool supplied with the Wave Expansion Will be fastened in placeUse the screws that you removed in to fasten the cover Back in place Checking the Installed Wave Expansion Boards Selecting Wave Expansion Board Tones Installation de la carte d’extension Wave French language for Canadian Safety Standard Installer les cartes de série SRX Appareils reliés au RD-700Schéma suivant Série SRX SRX A, SRX B tout en enfonçant les supports à Power p Pour tourner les supports en position Lock verrouilléReposez le couvercle en remettant les vis enlevées comme Spécifié à l’étape Connecting the RD-700 to External Equipment Before you begin making connections, confirm the following Connecting Pedals Connect supplied AC power cable to the RD-700, and plugOther end into an AC power outlet Connect the RD-700 and the external device Turning the Power On and Off Turning On the Power Adjusting the Volume Turning Off the Power Restoring the Factory Settings Factory Reset Press Cursor To select 9.Utility To display the Edit screen Press Cursor to select Factory Reset All Press INC/YES Adjusting the Display Contrast LCD Contrast Press Cursor To select 0.System To display the Edit screenPress Cursor or to move the cursor to the LCD Contrast parameter Tuning to Other Instruments’ Pitches Master Tune Press Edit to make the indicator go dark Getting Ready Overview of the RD-700 Units of SoundBasic Organization of the RD-700 Tone Basic Operation of the RD-700 Main ScreensSpecial Indications About the Function Buttons Changing the Settings Values About the Cursor Buttons Listening to the Demo Demo Play Hold down NUM Lock and press WritePress Cursor / to select the song that you wish to hear Press Cursor or INC/YES to start playback of the demo song Performing with the Keyboard Piano Performances One Touch PianoPress ONE Touch Piano Performing with a Variety of Tones Performing with the KeyboardTones in Layer and Split Press NUM Lock to make the indicator light Specifying the Tone Number to Select a Tone NUM LockEnter the tone number with the Tone Select buttons Press Enter Playing a Rhythm Set Press Tone Select RHY/GM2 Press Expansion a or B to make its indicator light Changing Tones Layer and Split Mode pSelecting Wave Expansion Board Tones Play the keyboard, and you will hear the selected tone Wave Expansion Board Rhythm Set Tone Numbers Fig.Q1-10 To Switch to Single Mode To Turn Off Layer or Split Extinguishing the IndicatorPlaying Two Tones on the Keyboard Press ONE Touch Piano Press LAYER, getting the indicator to light Playing with Two Layered Tones Layer Press SPLIT, getting the indicator to light Selecting Both Layer and Split ModeKeyboard’s Split Changing Tones in Layer and Split Mode Hold down Split for several secondsHold down Split and press a key Range for Each Part Key Range p Adjusting the Volume Each Part Midi TX Part Part Level Slider Transposing the Key of the Keyboard Transpose Hold down Transpose for several secondsHold down Transpose and press a key Transposition for Each Individual Part Key Transpose p Adding Reverberation to the Sound Reverb knob Adding Breadth to the Sound Chorus knob Press Equalizer ON/OFF to make its indicator light Turn the knobs to adjust the levels in each rangeSimulating the Creation Organ Tones Tone Wheel Mode p Equalizer Frequency Settings Freq/Q p Using the Convenient Functions in Performances Creating Arpeggios from the Chords You Play Arpeggio Using the Convenient Functions in Performances For details, refer to Making Arpeggio Settings Arpeggio pSetting the Way Arpeggios are Played Style p Changing the Arpeggio Style Press Part Switch Rhythm to make the button indicator light Switching the Intro Ending On or Off Intro Ending pPlaying Rhythm Rhythm Patterns Pattern p Changing the Rhythm Pattern Changing Rhythm TemposRhythm Pattern List p When Using Multi-effects in Split or Layer Mode Applying Effects to the SoundEffect/Parameter List Selecting Stored Settings Setup Press SETUP, getting the indicator to light Selecting Setups Without Pressing NUM Lock Try playing the keyboard Storing Settings to Setups Write Press WRITE, getting the indicator to lightPress Cursor to move the cursor to the new Setup name When INC/YES is pressed, saving of the Setup begins Repeat steps 5-6 to input the name Settings Not Saved in a Setup Setup About Midi Connectors Connecting to External Midi Sound GeneratorsWhat’s MIDI? Midi Send Channel Settings Using the RD-700 As a Master KeyboardPress Midi TX, getting the indicator to light Part Settings Description Parameter Settings Selecting Sounds on an External Midi Device Adjusting the Volume of Each Part Midi TX Part Adjust the Volume Level For Individual Parts Detailed Settings for Transmitted Parts Midi TX How to Make SettingsAdjusting the Volume and Pan Setting the Key Range LWR/UPR Setting the Transposition for Each Changing Tone ElementsIndividual Part Key Transpose Smoothly Changing the Pitch Portamento Changing the Pitch Coarse Tune/Fine TuneDescription Value Parameter Description Value Making the settings ParametersSelecting the Piano Sound Changing the Width of the Sound Stereo Width Making Detailed Settings for the Piano Tones Piano Edit Changing the Sense of Space Surrounding the Sound AmbienceChanging the Amount of Reverb Effect Reverb Level EQ-SW ON, OFF Detailed Settings for Each Function Edit Parameters That Can Be Set Setting Parameters Making System Settings SystemDetailed Settings for Each Function Edit Cursor Adjusting the Volume Master Volume Switching Between Reception GM/GM2 System On and GS ResetChanging the Clock Timing Source Clock Source Setting the Keyboard Touch Setting the Device ID NumberSwitching the Pedal’s Polarity Pedal Polarity Key Touch Setting a Constant Volume Level Velocity Delay SensChanging the Key Touch Response to the Playing Force Pedal, Control Knob, and Equalizer Settings Control/EQ Param Value Function/Parameter Setting Eter ChangedAssigning Functions to Pedals FC1/FC2 Changing the Control Knob Settings Control/Src Changing the Equalizer Frequency Settings Freq/Q Tones Tone Wheel Mode Simulating the Creation of OrganWhat Are Feet? Changing the Undulation of the Organ Chorus Settings Screen Delay Settings ScreenRHY LWR UP2 UP1 Making Multi-Effects Settings MFX Source, MFX DestType MFX Control Making Reverb Settings Setting Chorus and Delay Making Tone Settings Tone Edit Detailed Settings for Each Function Edit Chorus FeedbackWhen Chorus/Delay is Set to Delay Delay-Center Delay-Left Setting the Reverb/Chorus Depth Reverb/Chorus Amount Selecting the Part to Be Set Part, ToneChanging the Effect Applied to the Tone MFX Playing Sound Monophonically Mono/Poly Portamento Switch/Time Creating Smooth Pitch ChangesChanging the Bend Range Bend Range Making the Rhythm Settings Rhythm Pattern Adjusting the Tempo TempoChanging Patterns Pattern Selecting Rhythm Variations Making Arpeggio Settings Arpeggio Switching the Intro and Ending On or Off Intro/EndingChanging the Drum Set Rhy Set Creating Arpeggios from the Chords You Play Arpeggio p Setting the Way Arpeggios are Played Style Selecting Parts to Play Arpeggios Dest. Part Changing the octave range Arpeggio style Octave RangeChanging the Order in Which Arpeggio Style List p Beat Pattern Accent RateShuffle Rate Settings Local Part Param Keyboard Part and ControllersKeeping the Force of the Notes Constant Velocity Setting the Change in Volume Setting the Key Range for EachAccording to the Force Used to Play the Keyboard Setting Midi Receive Parts Internal Part Prm Turning the Controllers in Each Part On and OffAssigning Internal Parts to Local Parts Part Assign Setting the Receive Channel Receive Channel Setting the Volume and Pan Volume/PanMaking the Effect ON/OFF Settings MFX Switch Setting the Required Polyphony Voice Reserve Setting the Tuning Method Temperament/Key Settings to an External Midi Other Functions UtilityTransferring the RD-700’s Device Bulk Dump Number Device ID p Restoring the settings to Factory condition Factory ResetFactory Reset All Factory Reset Current Connecting External Midi Devices Connecting to an External SequencerSwitch p Recording RD-700 Performances to an External Midi Sequencer About the Local Switch Connecting External Midi DevicesExiting Rec Mode Recording the Performance Setting the Channels Switching SetupsSwitching Tones Making connections Using the RD-700 as a GM Sound Module GM Mode Points to Note Regarding GM ModePlaying Back GM Scores Troubleshooting Problem Check/Solution Troubleshooting 100ANO? 101 Moved 102 Error Messages/Other Messages Error messagesOther Messages 103 Effect/Parameter List 104Stereo EQ Stereo Equalizer Overdrive Effect/Parameter List 105 106 RotaryCompressor Limiter 107 Tremolo CHO Tremolo ChorusSPACE-D Stereo Chorus Stereo Delay 10815 ST.FLANGER Stereo Flanger Step Flanger MOD Delay Modulation Delay TRI TAP DLY Triple Tap Delay109 Quad TAP DLY Quadruple Tap Delay Time Ctrl DLY Time Control Delay110 111 22 2V PCH Shift 2 Voice Pitch ShifterFBK PCH Shift Feedback Pitch Shifter Reverb 112 Gated Reverb26 OD→CHORUS Overdrive→Chorus 27 OD→FLANGER Overdrive→Flanger 113 ENHANCR→DELAY Enhancer→Delay CHORUS→DELAY Chorus→DelayFLANGER→DELAY 114 CHORUS/DELAY FLANGER/DELAYStereo Phaser 115 116 Keysync Flang Keysync FlangerFormant Filtr Formant Filter Multi TAP DLY Multi Tap Delay 117Ring Modulat Ring Modulator Reverse Delay Shuffle Delay118 48 3D Delay 11949 3V PCH Shift 3 Voice Pitch Shifter Lofi Compress 120 Lofi NoiseSP Simulator Speaker Simulator 121 Stereo CompressorStereo Limiter 122 GateSlicer Isolator 123 60 3D Chorus61 3D Flanger 124 TremoloAuto PAN 64 SYM.RESONANCE Sympathetic Resonance 125 65 OD→ROTARY Overdrive→Rotary Effects Parameter List Stereo Delay LimiterHEXA-CHORUS Tremolo CHO MOD Delay TRI TAP DLYQuad TAP DLY Time Ctrl DLY 28 OD→DELAY DISTORTION→DELAYENHANCR→DELAY CHORUS→DELAY FLANGER→DELAY CHORUS/DELAYFLANGER/DELAY Stereo Phaser Reverse Delay Shuffle DelayMulti TAP DLY 49 3V PCH Shift Lofi Noise SP Simulator55 ST.COMPRESSOR 56 ST.LIMITER 60 3D Chorus 61 3D FlangerTremolo Auto PAN Delay Reverb ParametersChorus Parameters SRV ROOM/SRV HALL/SRV Plate Tone List Piano CLAV/MALLET StringsPiano Organ PAD 135 Tone List GTR/BASSVOICE/SYNTHRHYTHM/GM2 BRASS/WINDS 137 Rhythm Set List 138RD Pop Kit RD Rock Kit RD Jazz Kit RD House Kit 139 GM2 Standard GM2 Room GM2 Power GM2 Electric GM2 Analog 140 141 GM2 Jazz GM2 Brush GM2 Orchstra GM2 SFX Arpeggio Style List 142Style Motif Beat Pattern Accent Rate Rhythm Pattern List 143Rhythm Pattern Recommended Tempo Rhythm Pattern Setup List Setup Name144 Shortcut List 145What to do Operation Midi Implementation Receive data146 Channel Voice Messages Midi Implementation 147Pitch Bend Change Channel Mode Messages 148System Realtime Message System Exclusive Message 149 Universal Realtime System Exclusive MessagesGlobal Parameter Control 150 Data Transmission Data set 1DT1 GM Mode 151Data Transmission Channel Voice Messages Note off Data set 1DT1 152 Midi Implementation Parameter Address Map 153System Realtime Messages System Exclusive Messages System Onetouch Piano Tone Backup Setup CommonSetup Common MFX 154 Setup Common Chorus Setup Common Reverb155 Setup Local Part Setup Midi Tx PartSetup Internal Part 156 Midi Implementation GS Model ID = 42H 157 Drum Setup Parameter 158 159 Arpeggio Parameter ListDecimal and Hexadecimal Table How to calculate the checksum 160Examples of Actual Midi Messages Example of an Exclusive Message and Calculating a Checksum Scale Tune Feature address 40 1x 161Ascii Code Table Midi Implementation Chart 162 Vibrato delay 163 Main Specifications 164 Index 165 Index 166 167 REV Purpose-Oriented Index 168 Memo 169 Africa AsiaAUSTRALIA/ NEW Zealand Europe Avis 02565478 ’04-5-9N