FREEZE: You may freeze the program picture you are watching thanks to this feature.
For this purpose, press the (
) button
OK/ on your remote control while there are
FREEZE
no menus on the screen. The program picture will freeze until the same button is pressed for the second time.
Note: The Freeze feature also freezes PIP screen while there is a PIP picture on the screen.
Using the PIP (Picture in Picture) feature;
Press the (
) button on your remote PIP SEL. control. The PIP screen appears on the screen. According to the selected source, a window will be opened inside the main picture and a
displayed.
You can return to PAP mode by pressing the button (
) again. You can return to the normal
mode by pressing the (
) button in the PAP mode.
To change the source on the PIP screen in the PIP or PAP mode, you may use the up/down
(
)/(
) direction buttons.
Note1: All the sources can be selected in the PIP while there is TV or AV on the screen. However, only TV/AV can be watched while there is COMP/HDMI/PC on the main screen. Note2: The PIP source information available in the TV/AV mode and the PIP source information available in the COMP/HDMI/PC mode are the same. Hence, the PIP source also changes once the main screen has been switched from TV/AV to COMP/HDMI/PC.
PIP Position:
With this option, you can change the
PIP POS. position in which the PIP window is visualized on the screen. For this
purpose, you may change the PIP Position by pressing the Right/Left direction (
)/(
) buttons after pressing
the 
button while there is a PIP picture on the screen.
PIP Dimension:
With this option, you may zoom in and zoom out the PIP window size. For this purpose, you may change the PIP size
by pressing the (
) button while there is a PIP picture on the screen.
PAT Mode:
While watching a broadcast on your PAT television, you can enter the PAT (Picture and teletext) mode pressing the (
) button on your remote control. Thanks to this feature, you can also follow the
teletext broadcast if there is also a teletext broadcast in the program that is being watched. To abort this mode, press again the (
) button found on your remote control.
Flickering of the picture can occur in PIP, PAP and PAT modes.
ENGLISH
