Panasonic DP-180 appendix Network Settings, For Department Counter For Maximum Copies

Function

For Example

■Department Counter

The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers for each department. (Maximum Number of Departments: 50)

Contact your authorized service provider to enable the Department Counter feature.

1 2

If set in other function mode

7				8
	KEY OPR. MODE		(00-31)
	ENTER NO.	OR	∨ ^

3 FUNCTION MODE (1-2)

ENTER NO. OR ∨ ^

or

1: General Settings

13 DEPT. COUNTER MODE 1: TOTAL COUNTER

or

13 DEPT. COUNTER MODE

11 For Department Counter		For Maximum Copies
	DEPT. COUNTER	MAX COPIES
	01:123145	01:12345678

For ID (Identification) Code

ID CODE 01:12345678

	Maximum	ID Code
Clear the	number of	(1 to 8-digit)
counter to "0".	Copies (8-digit)

■Network Settings

When the Parameter No. “22 DHCP DEFAULT” is set to “INVALID”, the Key Operator must administer the following Network settings manually.

Enter these required Network setting: "19 TCP/IP ADDRESS”, “20 TCP/IP SUBNET MSK” and “21 TCP/ IP G/W ADDR.”, in the same manner as shown in the following example.

1Same procedure as steps 1 to 6 above.

5 19 TCP/IP ADDRESS

44

19 TCP/IP ADDRESS 192.168.1.100

Input the TCP/IP Address Ex.: 192.168.1.100

Use the “ ” key to enter a period. 1 → 9 → 2 →

→1 → 6 → 8 →

→1 → → 1 → 0 → 0

6 20 TCP/IP SUBNET MSK

Input Subnet Mask same procedure as step 5.