Panasonic DP-180 Icon Contents Reset Key, SET Key, Function Key, Flashes, Function settings, Keys

No. Icon Contents

RESET Key

Resets all features to the initial

18power-on state.

SET Key

20Sets the parameter(s) of Function settings.

FUNCTION Key

Use when changing the paper

22size, initial function values (default values) and key operator settings.

ALARM LED (RED) Lights/Flashes when trouble occurs.

Lights:

Machine detected a trouble status

●No paper in the selected tray or toner has run out.

24● Machine detected trouble, such as paper misfed or jammed.

Flashes:

Machine detected an alarm status

●No paper in the Tray. (Tray not selected)

●Toner is getting low, etc.

No.	Icon	Contents
		Keypad
19		Sets copy quantities or
		inputs the parameter(s)
		of Function settings.

CLEAR Key

21Clears the copy count in the display.

ACTIVE LED (GREEN)

Flashes when machine is

23active.

PRINT DATA LED (GREEN)

Flashes:

When receiving printing data.

Lights:

While printing.

25

Before Starting

Keyboard

Inputs the Station, Machine name(s) of the

parameter settings, etc. (See pages 47-51)When inputting a special character, press the "_/()..." Key and use the ( / )

26 Cursor Keys to select a character.

When changing the stored character, move the cursor ( ) back to the character and press the CLEAR Key then input a new character.

	DARKER/LIGHTER
	Keys
27	To adjust the Manual
	Exposure.	28
	(See pages 25 and 46)
	SCAN/FILE Key
29	Used for network scanning.

DUPLEX Key

Selects a 2-Sided copy. (See page 27)

	N in 1 Key		DOUBLE EXPOSURE Key
30	Selects N in 1 copy mode.	31	Selects Double Exposure
	(See page 29)		mode. (See page 30)

REMOTE COPY Key

32	Selects a Remote Copy. (See page 53)
	NOTE: To adjust the brightness of the LCD display, press and while holding down the CLEAR
	Key, keep pressing the ORIGINAL SIZE or COPY SIZE Key until the desired brightness
	is achieved.
	ORIGINAL SIZE: Dimmer		23
	COPY SIZE	: Brighter