Magnavox H2160MW9 owner manual Autostart Recording, Press REC to start recording.1/ 11/10000034

AUTOSTART RECORDING

Every time you turn on this unit, this unit automatically records the channel currently viewed and temporarily stores the recorded content to the HDD (Autostart recording). By using this function, you can pause or go back the TV program you are currently watching, and you can also start recording the whole TV program even at the middle of the TV program. The temporary recording can be made up to 6 hours of time range. If the recording exceeds 6 hours, earliest recording will be overwritten.

			OPEN/
STANDBY-ON	DTV/TV	SOURCE	CLOSE
.@/:	ABC	DEF
GHI	JKL	MNO	CHANNEL
PQRS	TUV	WXYZ
	SPACE	CLEAR
SETUP	AUDIO	REPEAT	HDMI
DISC MENU			TITLE

OK

DISPLAY		RETURN
V.REPLAY	V.SKIP
RAPID PLAY
D.DUBBING	HDD	DVD
TIMER	REC MODE	REC

The autostart recording will be stopped, cleared in following cases:

-Turning off the power

-Start recording

-Editing titles or goes into editing menu

-Deleting titles (DVD only)

-Start dubbing

-Changing input channels

-Using any functions in “Disc Edit” or “HDD Menu”

-Selecting following menus:

“General Setting” ➔“Display” ➔“V-Chip” ➔“Downloadable Rating” “General Setting” ➔ “Channel” ➔ “Auto Channel Preset” “General Setting” ➔ “Channel” ➔ “Manual Channel Preset”

•The autostart recording will automatically resume for new recording

For how to playback the autostart recording, refer to “Playing back the Autostart Recording” on page 74.

Recording the Contents of the Autostart Recording

1When watching TV program through this unit’s tuner, use [H], [E] or [V.REPLAY] to locate your desired point to start recording.

•The autostart recording information will appear. Refer to page 22.

2:59:44 / 3:31:31
7:10AM	10:42AM
	10:10AM

2Press [REC] to start recording.1/ 11/1000:00:34 / 0:32:34

HDD

HDD SP 1h53m

	From the selected point, the contents of the
Note	autostart recording become a recording title in
	the HDD while the unit continues to record the
• In the autostart recording, when you display the DTV	current content of the channel.
program information, the information will be
recorded as the part of the picture.	Press [STOP C] twice to stop
• If there is not enough recordable space on HDD to	recording.
record from the selected point to current point, you
	The recording stops and new autostart recording
cannot record the content of autostart recording.	3 begins.
• When you record the content of the autostart	• If you press [STOP C] once, the image on the
recording, the recording mode will be SP.
	TV screen goes back to current content of the
• When you are recording the contents of the autostart
	channel while the recording continues.
recording, if you record the part that is copy-protected,
“Copy guard detected.” appears and you are not able to
watch the part.

44 EN