Magnavox H2160MW9 owner manual Program Playback, 5Press Play B, To go back to the specific time

SPECIAL PLAYBACK

Program Playback Playing Back the Autostart Recording

You can program the disc to play back in your desired order.

1)Press [SETUP].

2)Use [K / L] to select “CD Playback Mode”, then press [OK].

“CD Playback Mode” menu will appear.

3)Use [K / L] to select “Program Play”, then press [OK].

4)Use [K / L] to select a desired track, then press [OK] or [B].

	CD Playback Mode
Program Play
--	--	--	--	--	--	--	--	--	--
--	--	--	--	--	--	--	--	--	--
--	--	--	--	--	--	--	--	--	--
--	--	--	--	--	--	--	--	--	--
--	--	--	--	--	--	--	--	--	--
							Total		0:00:00

Repeat this step until you program all the desired tracks.

5)Press [PLAY B].

	CD Playback Mode
Program Play
09	04	10	06	--	--	--	--	--	--
--	--	--	--	--	--	--	--	--	--
--	--	--	--	--	--	--	--	--	--
--	--	--	--	--	--	--	--	--	--
--	--	--	--	--	--	--	--	--	--
							Total		0:31:07

Program playback will start.

Note

•To erase tracks you selected, press [CLEAR] at step 4.

•You can make program settings up to 50 tracks.

•To cancel program playback, press [STOP C] twice during program playback. “OFF” appears on the TV screen.

•Program information will be retained until you power off the unit or open the disc tray.

•You may also select a desired track using [the Number buttons] at step 4.

•For video CD with PBC function, the PBC setting will be switched to off automatically when you start program playback.

By playing back the autostart recording, you can pause or go back the TV program you are currently watching. For the autostart recording refer to “AUTOSTART RECORDING” on page 44.

To pause and resume the TV program:

1)When watching TV program through this unit’s tuner, press [PAUSE F].

TV program will be paused and sound will be muted.

2)Press [PLAY B] to resume the TV program you were watching from where you have paused.

To go back the TV program:

When watching TV program through this unit’s tuner, press [H], [E] or [V.REPLAY].

•While playing back the autostart recording, pressing [H] or [G] skips playback point 5 minutes backward or forward.

To go back to the specific time:

1)When watching TV program through this unit’s tuner, press [DISPLAY], then press [OK].

2)Use [K / L / { / B] or [the Number buttons] to enter a desired time, then press [OK].

•While playing back the autostart recording, press [STOP C] to cancel the playback.

•When watching TV program or while playing back the autostart recording, press [DISPLAY] once to display the autostart recording information. Refer to “Autostart Recording Information” on page 22.

•Noise reduction, zoom and virtual surround functions are available while playing back the autostart recording.

Note

•While playing back the autostart recording, you cannot change the channels.

•While playing back the autostart recording, you cannot change the DTV audio language.

•If you change to DVD mode or if the timer recording starts while playing back the autostart recording, the playback will be stopped.

•When this unit turns on for the timer recordings, the autostart recording will not be performed.

•For the contents of the autostart recording, you cannot change the TV audio.

74 EN