INSTALLATION REQUIREMENTS

The microwave oven is set for recirculation installation. For external (wall or roof) venting, see “Venting Design Specifications” section.

Tools and Parts

Tools Needed

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Location Requirements

Check the opening where the microwave oven will be installed. The location must provide:

Minimum installation dimensions. See “Installation

 

Dimensions” illustration.

Minimum one 2" x 4" (50.8 x 101.6 mm) wood wall stud and

Measuring tape

Pencil

Masking tape or thumbtacks

Scissors

T10 TORX®† screwdriver

No. 3 Phillips screwdriver for 1/4-20 x 3" bolts

Electric drill

3/16" (5 mm) and 3/8" (10 mm) drill bits

3/4" (19 mm) hole saw

Diagonal cutting pliers

Stud finder

7/16" socket wrench

(or box wrench) for 1/4" x 2" lag screws

1½" (3.8 cm) diam. hole drill bit for wood or metal cabinet

Keyhole saw

Caulking gun and weatherproof caulking compound

Duct tape

minimum 3/8" (10 mm) thickness drywall or plaster/lath within

cabinet opening.

Support for weight of 150 lbs (68 kg), which includes

microwave oven and items placed inside the microwave oven

and upper cabinet.

Grounded electrical outlet inside upper cabinet. See

“Electrical Requirements” section.

NOTES:

If installing the microwave oven near a left sidewall, make sure

there is at least 3" (7.6 cm) of clearance between the wall and

the microwave oven, so that the door can open fully.

Some cabinet and building materials are not designed to

withstand the heat produced by the microwave oven for

cooking. Check with your builder or cabinet supplier to make

sure that the materials used will not discolor, delaminate or

sustain other damages.

Parts Supplied

For information on reordering, see “Replacement Parts” section.

NOTE: The hardware items listed here are for wood studs. For other types of wall structures, be sure to use appropriate fasteners.

A B C D E F G

H

I

For gas cooktop, we recommend that combined cooking

 

surface rating does not exceed 55,000 BTU/hr.

The microwave oven is set for recirculation mode. For external

 

(wall or roof) venting, see “Venting Design Specifications”

 

section.

Special Requirements

For Wall Venting Installation Only:

Cutout must be free of any obstructions so that the vent fits properly, and the damper blade opens freely and fully.

For Roof Venting Installation Only:

If you are using a rectangular to round transition piece, 3" (7.6 cm) clearance needs to exist above the microwave oven so that the damper blade can open freely and fully. See “Rectangular to Round Transition” illustration in “Venting Design Specifications” section.

A. 1/4-20 x 3" round-head bolts (2) B. 1/4-20 x 3" flat-head bolts (2) C. Washers (2)

D. Toggle nuts (2)

E. 1/4" x 2" lag screws (2) F. Mounting screws (3)

G. Power supply cord bushing (1)

H. Damper assembly (for wall or roof venting)

I. Vent deflector (for wall or roof venting)

Not Shown:

Upper cabinet template

Mounting plate (attached to back of microwave oven)

Aluminum grease filters

Charcoal filters (Depending on model, charcoal filters may not be included. See Use and Care Guide.)

NOTE: Depending on model, aluminum grease filter and charcoal filter may be combined.

Materials needed

Standard fittings for wall or roof venting. See “Venting Design Specifications” section.

†®TORX is a registered trademark of Textron Innovations Inc.

2

Page 2
Image 2
KitchenAid W10190015A, W10189719A Installation Requirements, Tools and Parts, Location Requirements

W10189719A, W10190015A specifications

KitchenAid has long been synonymous with quality and innovation in kitchen appliances, and the W10190015A and W10189719A models are no exception. These products exemplify the brand's commitment to delivering exceptional performance and user-friendly features, making them essential tools for both amateur and professional chefs.

The W10190015A is primarily known as a replacement part for certain KitchenAid appliances, including various models of dishwashers. This component focuses on ensuring optimal performance and longevity of the appliance, featuring robust design characteristics that meet high standards of durability. Its compatibility with a wide range of KitchenAid dishwasher models means that users can easily find a suitable replacement without worrying about fitment issues. The installation process is designed to be straightforward, empowering DIY enthusiasts to tackle repairs without the need for professional assistance.

Conversely, the W10189719A is often noted for its role in enhancing the functionality of KitchenAid refrigerators. This part typically focuses on water filtration, ensuring that the water dispensed from the refrigerator is clean and free from impurities. With a high filtration capacity, it efficiently removes contaminants, providing peace of mind for families who rely on their refrigerator for both drinking water and ice-making capabilities. The W10189719A is designed for easy replacement, ensuring that users can maintain their refrigerator's performance without hassle.

Both products benefit from KitchenAid's commitment to quality engineering, ensuring that they not only perform well but also stand the test of time. The brand's adherence to rigorous testing standards means that users can trust these components to deliver consistent results, whether in terms of cleaning performance in dishwashers or water quality in refrigerators.

In addition to their practical features, these models reflect KitchenAid’s aesthetic sensibilities, blending seamlessly into the modern kitchen environment. The sleek design and attention to detail serve to complement the overall elegance of KitchenAid appliances, making them not only functional but also visually appealing.

In summary, the KitchenAid W10190015A and W10189719A are exemplary parts that embody the brand's dedication to quality, performance, and user satisfaction. Whether it's ensuring your dishwasher runs efficiently or providing purified water from your refrigerator, these components are integral to maintaining the high standards that KitchenAid has set in the kitchen appliance market.