Manuals / KitchenAid / Kitchen Appliance / Microwave Oven

KitchenAid W10189719A, W10190015A Install the Microwave Oven, For Roof Venting Installation Only

Models: W10189719A W10190015A

1 12
Download 12 pages 15.23 Kb
Page 9
Image 9

5.Cut the 1¹⁄₂" (3.8 cm) diameter hole at the circular shaded area “G” on the template. This hole is for the power supply cord.

NOTE: If upper cabinet is metal, the supply cord bushing needs to be installed around the supply cord hole, as shown.

B

A

A. Metal cabinet

B. Power supply cord bushing

6.Drill 3/8" (10 mm) holes at points “D” and “E” on the template. These are for two 1/4-20 x 3" bolts and washers used to secure the microwave oven to the upper cabinet.

For Roof Venting Installation Only

7.Cut 3/4" (19 mm) hole at one corner of the shaded rectangular area “F” on Upper Cabinet Template.

8.Using a keyhole saw, cut out the rectangular area.

Install the Microwave Oven

WARNING

Excessive Weight Hazard

Use two or more people to move and install microwave oven.

Failure to do so can result in back or other injury.

IMPORTANT: The right side of the microwave oven is the heavy side. Handle the microwave oven gently.

1.Place a washer on each 1/4-20 x 3" bolt and place inside upper cabinet near the 3/8" (10 mm) holes.

2.Make sure the microwave oven door is closed and taped shut.

3.Using 2 or more people, lift microwave oven and hang it on support tabs at the bottom of mounting plate.

NOTE: To avoid damage to the microwave oven, do not grip or use the door or door handle while the microwave oven is being handled.

A

B

A. Mounting plate

B. Support tabs

4.With front of microwave oven still tilted, thread power supply cord through the power supply cord hole in the bottom of the upper cabinet.

5.Rotate microwave oven up toward upper cabinet.

NOTE: If venting through the wall, make sure the damper assembly fits easily into the vent in the wall cutout.

6.Push microwave oven against mounting plate and hold in place.

NOTE: If microwave oven does not need to be adjusted, skip steps 7-9.

7.If adjustment is required, rotate microwave oven downward. Using 2 or more people, lift microwave oven off of mounting plate, and set aside on a protected surface.

8.Loosen mounting plate screws. Adjust mounting plate and retighten screws.

9.Repeat steps 3-6.

10.With the microwave oven centered, and with at least one person holding it in place, insert bolts through upper cabinet into microwave oven. Tighten bolts until there is no gap between upper cabinet and microwave oven.

NOTES:

■Some upper cabinets may require bolts longer or shorter than 3" (7.6 cm). Longer or shorter bolts are available at most hardware stores.

■Overtightening bolts may warp the top of the microwave oven. To avoid warping, wood filler blocks may be added. The blocks must be the same thickness as the space between the upper cabinet bottom and the microwave oven.

A

A. 1/4-20 x 3" bolts

9

Page 8 Page 10
Page 9
Image 9
KitchenAid W10189719A, W10190015A installation instructions Install the Microwave Oven, For Roof Venting Installation Only
Page 8 Page 10

W10189719A, W10190015A specifications

KitchenAid has long been synonymous with quality and innovation in kitchen appliances, and the W10190015A and W10189719A models are no exception. These products exemplify the brand's commitment to delivering exceptional performance and user-friendly features, making them essential tools for both amateur and professional chefs.

The W10190015A is primarily known as a replacement part for certain KitchenAid appliances, including various models of dishwashers. This component focuses on ensuring optimal performance and longevity of the appliance, featuring robust design characteristics that meet high standards of durability. Its compatibility with a wide range of KitchenAid dishwasher models means that users can easily find a suitable replacement without worrying about fitment issues. The installation process is designed to be straightforward, empowering DIY enthusiasts to tackle repairs without the need for professional assistance.

Conversely, the W10189719A is often noted for its role in enhancing the functionality of KitchenAid refrigerators. This part typically focuses on water filtration, ensuring that the water dispensed from the refrigerator is clean and free from impurities. With a high filtration capacity, it efficiently removes contaminants, providing peace of mind for families who rely on their refrigerator for both drinking water and ice-making capabilities. The W10189719A is designed for easy replacement, ensuring that users can maintain their refrigerator's performance without hassle.

Both products benefit from KitchenAid's commitment to quality engineering, ensuring that they not only perform well but also stand the test of time. The brand's adherence to rigorous testing standards means that users can trust these components to deliver consistent results, whether in terms of cleaning performance in dishwashers or water quality in refrigerators.

In addition to their practical features, these models reflect KitchenAid’s aesthetic sensibilities, blending seamlessly into the modern kitchen environment. The sleek design and attention to detail serve to complement the overall elegance of KitchenAid appliances, making them not only functional but also visually appealing.

In summary, the KitchenAid W10190015A and W10189719A are exemplary parts that embody the brand's dedication to quality, performance, and user satisfaction. Whether it's ensuring your dishwasher runs efficiently or providing purified water from your refrigerator, these components are integral to maintaining the high standards that KitchenAid has set in the kitchen appliance market.