What to do if, Remedying Faults | AEG 86740 manual

Instructions for use

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even dur- ing the warranty period.

• It the fault code C1 or C2 appears in the multi display, you may be able to remedy the fault yourself (see the fault table below).

After remedying the fault, press the button

START/PAUSE (START/PAUZE, MARCHE/PAUSE). If the fault code is displayed again, please inform the Customer Service.

•In the case of all other displayed faults (C and number or letter), please inform the Customer Service and state the fault code.

	Problem	Possible cause	Remedy
		Electric plug not inserted.	Insert electric plug.
		Fuse of the mains installation	Replace fuse.
		is not correct.
	Washing machine does	Door is not properly closed.	Close door; Lock must en-
	not function.	Door is not properly closed.	gage audibly .
	not function.		gage audibly .
		Button: START/PAUSE	Press START/PAUSE (START/
		(START/PAUZE, MARCHE /	PAUZE, MARCHE /PAUSE)
		PAUSE) has not been pressed	button until the programme
		long enough.	starts.
		Child safety feature is	Cancel child safety feature
	Door cannot be closed.	Child safety feature is	(see section „Childsafety
	Door cannot be closed.	switched On.	(see section „Childsafety
		switched On.	feature“).
			feature“).
		Water tap is switched Off	Open water tap.
	Water is not entering.	Filter in the socket of the in-	Close water tap. Disconnect
	Water is not entering.	Filter in the socket of the in-	hose from water tap, remove
	Error code (1 ap-	flow hose connection is	filterand clean under
	Error code (1 ap-	blocked.	filterand clean under
	pears.	blocked.	running water.
	pears.		running water.
		Water tap is full of lime or	Check water tap, if necessary
		defective.	have it repaired.

35

Image 35

AEG 86740 manual What to do if, Remedying Faults, After remedying the fault, press the button

Contents

ÖKO-LAVAMAT 86740 update Dear customer Contents What to do if Remedying FaultsPage Correct Use SafetyBefore Putting into Operation for the First Time General Safety Child Safety For polyoxymethylene, e.g. plastic clips DisposalEnvironmental Tips Dispose the packing material Drawer for Washing Powder and Care Agent Unit DescriptionFront View Programme knob Control Panel Silk ZIJDE, SOIE/ P handwash Wool WOL, LAINE/ P Hand wash program PRE Wash VOORWAS, PRELAV. Pre wash/Soaking Additional programme buttons Two levels for other programmes Programmable functions Consumption values and time requirements Temperature Wash Time Display What does Update mean?Water Protection Aqua Control + Aqua Alarm Sorting and preparing a wash load Before the first washPreparing a Wash Load Types of washing and care symbols Water Softener How much washing detergent and care agent? Open door, remove washing Carrying out a wash cycleBrief instructions After completion of the wash programme Setting the wash programme Change Spin Speed / Select Rinse Hold Soaking duration Setting the delay timer/soaking time Delay timer Putting in the washing Opening and Closing the Filling Door Compartment for pre-wash agent/soaking agent When using liquid washing agent/TabsAdd Washing Detergent/Care Agent Compartment for powdered washing agent/Tabs Starting the wash program For a set delay time Changing speed of spinning Sequence of the programmeProgramme sequence display Multi display Remove washing Turn programme knob to OFF UIT, Arret Wash cycle ended/Remove washing Lights up, too much washing detergent was used Wash Programme tables Fashion Separate Spinning Separate Rinsing/Conditioner/Starching/Impregnation Washing Detergent Drawer Cleaning and Care Filling Door Washing Drum Before cleaning the drain pump Cleaning the drain pump What to do if Remedying FaultsAfter remedying the fault, press the button Been removed Conditioner has not Conditioner insert Rinsed, compartment No negative effect on If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washing Carry Out an Emergency Emptying Operation Gency unlocking and remove the plug from the mains When all the washing solution has drained offEmergency Unlocking of the Filling Door Aid of the emergency unlocking facility Set additional rinse cycle Additional rinse cycle RINCAGE+With more water Water cooling Cancel additional rinse cycleSetting water cooling Gramme duration increase Cancel water coolingAdditional rinse cycle and water cooling Set loose spin Cancel loose spinVariomatic-loose spinning Releasing the programme security Setting programme securityProgramme security Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Safety Instructions for Installation Setting up and connection instructions Transporting the Unit Setting Up the UnitRemove the Transport Safeguard When transporting the unit with a sack trolley Supplied with the unit Firmly pull both hose holders off the unit Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Measurements in mm Technical DataDimensions Delivery Heads over 1m Belgium Guarantee conditions Guarantee conditions Customer services Page Page Index When do you incur costs even during the warranty period? Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG