Instructions for use

Washing Detergents and Care Agents

 

Which washing detergent and care agent?

 

Use only washing detergents and care agents which are suitable for use

 

in washing machines. Always follow the manufacturer's instructions.

 

How much washing detergent and care agent?

 

The amount to be used depends on:

 

• the dirtiness of the washing

 

• the hardness category of the mains water supply

 

• the filling quantity

2

If the detergent manufacturer gives no details of the dosing quantities

 

for minimum loads, add one third less for half loads and, in the case of

very small loads and for EASY IRON (STRIJKVRIJ, SANS REPASSAGE), only half the amount of detergent recommended for a full load.

Refer to the detergent/care agent manufacturer's instructions on use and dosage.

Water Softener

For medium to high water hardness (hardness category II or higher) you should use water softener. Pay attention to the manufacturer's instruc- tions. Always then meter detergent for hardness category I (= soft). The responsible water works can provide information on the local water hardness.

2

Since the water softener is added before the main washing detergent,

 

(water pre-softening), eighty percent of the softener quantity stated on

 

the package is sufficient.

 

 

 

Water Hardness Details

 

 

 

 

 

 

 

 

Water Hardness °dH

Water Hardness in mmol/l

 

Hardness Category

 

(degrees German

 

 

(millimol per litre)

 

 

 

hardness)

 

 

 

 

 

I – soft

 

0 - 7

up to 1.3

 

II – medium hard

 

7 - 14

1.3 - 2.5

 

III – hard

 

14 - 21

2.5 - 3.8

 

IV – very hard

 

over 21

over 3.8

 

 

 

 

 

18

Page 18
Image 18
AEG 86740 manual How much washing detergent and care agent?, Water Softener