AEG 86740 manual Been removed

Instructions for use

Problem	Possible cause	Remedy
	Transport safeguard has not	Remove transport safeguard
		according to setting up and
	been removed.
		connection instructions.
	The height adjustable	Align feet according to
	threaded feet are not	setting up and connection
	correctly adjusted.	instructions.
Washing machine vi-	There is very little washing in	Function is not affected by
brates during operation
	the drum (e.g. only a dressing
or is unsteady.	gown).	this.
	Water could not be fully	Move the path of the hose
		and, if necessary, remove
	pumped out before spinning
		kink or clean water pump
	because drainage hose is
		and, if necessary, remove
	kinked or water pump is
		foreign body from pump
	blocked.
		housing.
Wash water of the	Probably too much washing	Dose washing agent exactly
mainwashing foams		according to manufacturers
	agent has been filled in.
strongly.		instructions.
	Connection to the inflow	Tighten inflow hose
	hose is leaking.	connection.
	Drainage hose is leaking.	Check drainage hose and, if
		necessary, replace.
	Cover of the water pump is	Close cover properly.
	not properly closed.
Water leaks out of the	Washing is jammed	Abort programme, remove
		washing from door. Start
washing machine.	in the door.
		programme again.
		Close off emergency empty-
		ing hose (see section „Carry
	Emergency emptying hose is	out energy emptying opera-
	not properly closed off or is	tion“). In the case of a
	leaking.	leaking emergency emptying
		hose, call the customer
		service.
The emptying pump		Close water tap, remove
runs continuously -	Anti-flood system Aqua Con-
		electric plug and inform
also when the appli-	trol has displayed.	customer service.
ance is switched off.

36