Water cooling, Cancel additional rinse cycle | AEG 86740 specs

Instructions for use

Cancel additional rinse cycle

01. Turn programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE DELICAT).

2.Keep button DELICATES (BEHOEDZAAM, SENSITIVE) depressed for at least 5 seconds.

Immediately on pressing the button, RINSE+ (SPOELEN+, RINCAGE+) blinks on the programme cycle display. After 5 seconds RINSE+ (SPOELEN+, RINCAGE+) will stop blinking and lights up constantly for a further 5 seconds.

3.Whilst RINSE+ is lit up constantly, release the DELICATES (BEHOED- ZAAM, SENSITIVE) button.

After RINSE+ (SPOELEN+, RINCAGE+) has stopped lighting up, the ad- ditional rinse cycle is canceled.

3	With the use of the additional rinse cycle, the water consumption and
	programme duration increases.

Water cooling

	It may be necessary to cool the wash water before pumping out in or-
	der to prevent damage to plastics draining pipes.
3	The wash water is cooled before pumping out at the end of the main
	wash cycle (by the addition of cold water).

(This setting is only effective for the programme COTTON/LINEN, EASY-CARE (WITTE/BONTE WAS, BLANC/COULEURS, KREUKHERSTELLEND, DEFROISSABLE) with a temperature over 40 °C.) When supplying the appliance, no water cooling is set except for the additional programme DELICATES (BEHOEDZAAM, SENSITIVE).

Setting water cooling:

01. Turn programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE DELICAT).

2.Keep the PRE WASH (VOORWAS, PRELAV.) button depressed for at least 5 seconds.

After the button has been depressed for 5 seconds, the MAIN WASH (HOOFDWAS, LAVAGE) will blink on the programme cycle display for 5 seconds.

3.Whilst MAIN WASH (HOOFDWAS, LAVAGE) blinks, release PRE WASH (VOORWAS, PRELAV.) button.

When the blinking has stopped, the water cooling is set. It remains set until it is canceled.

43

Image 43

AEG 86740 manual Water cooling, Cancel additional rinse cycle, Setting water cooling

Contents

ÖKO-LAVAMAT 86740 update Dear customer Contents What to do if Remedying FaultsPage Before Putting into Operation for the First Time SafetyCorrect Use General Safety Child Safety For polyoxymethylene, e.g. plastic clips DisposalEnvironmental Tips Dispose the packing material Front View Unit DescriptionDrawer for Washing Powder and Care Agent Programme knob Control Panel Silk ZIJDE, SOIE/ P handwash Wool WOL, LAINE/ P Hand wash program PRE Wash VOORWAS, PRELAV. Pre wash/Soaking Additional programme buttons Two levels for other programmes Programmable functions Consumption values and time requirements Temperature Water Protection Aqua Control + Aqua Alarm What does Update mean?Wash Time Display Preparing a Wash Load Before the first washSorting and preparing a wash load Types of washing and care symbols Water Softener How much washing detergent and care agent? Open door, remove washing Carrying out a wash cycleBrief instructions After completion of the wash programme Setting the wash programme Change Spin Speed / Select Rinse Hold Soaking duration Setting the delay timer/soaking time Delay timer Putting in the washing Opening and Closing the Filling Door Compartment for pre-wash agent/soaking agent When using liquid washing agent/TabsAdd Washing Detergent/Care Agent Compartment for powdered washing agent/Tabs Starting the wash program For a set delay time Changing speed of spinning Sequence of the programmeProgramme sequence display Multi display Remove washing Turn programme knob to OFF UIT, Arret Wash cycle ended/Remove washing Lights up, too much washing detergent was used Wash Programme tables Fashion Separate Spinning Separate Rinsing/Conditioner/Starching/Impregnation Washing Detergent Drawer Cleaning and Care Filling Door Washing Drum Before cleaning the drain pump Cleaning the drain pump After remedying the fault, press the button Remedying FaultsWhat to do if Been removed Conditioner has not Conditioner insert Rinsed, compartment No negative effect on If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washing Carry Out an Emergency Emptying Operation Gency unlocking and remove the plug from the mains When all the washing solution has drained offEmergency Unlocking of the Filling Door Aid of the emergency unlocking facility With more water Additional rinse cycle RINCAGE+Set additional rinse cycle Setting water cooling Cancel additional rinse cycleWater cooling Additional rinse cycle and water cooling Cancel water coolingGramme duration increase Variomatic-loose spinning Cancel loose spinSet loose spin Programme security Setting programme securityReleasing the programme security Setting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting up and connection instructions Transporting the Unit Setting Up the UnitRemove the Transport Safeguard When transporting the unit with a sack trolley Supplied with the unit Firmly pull both hose holders off the unit Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Measurements in mm Technical DataDimensions Delivery Heads over 1m Belgium Guarantee conditions Guarantee conditions Customer services Page Page Index When do you incur costs even during the warranty period? Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG