Additional rinse cycle and water cooling | AEG 86740 guide

Instructions for use

4.if you want to check whether the water cooling is set:

–Turn the programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE DELICAT).

–Press the PRE WASH (VOORWAS, PRELAV.) button briefly.

If the MAIN WASH (HOOFDWAS, LAVAGE) blinks on the programme cy- cle display, then the water cooling is set.

Cancel water cooling:

01. Turn programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE DELICAT).

2.Keep the PRE WASH (VOORWAS, PRELAV.) button depressed for at least 5 seconds.

Immediately after the button is pressed, MAIN WASH (HOOFDWAS, LAVAGE) will blink on the programme cycle display. After 5 seconds MAIN WASH (HOOFDWAS, LAVAGE) will stop blinking and will remain lit constantly for 5 seconds.

3.Whilst MAIN WASH (HOOFDWAS, LAVAGE) is constantly lit, release the PRE WASH (VOORWAS, PRELAV.) button. The water cooling is canceled after MAINWASH (HOOFDWAS, LAVAGE) stops blinking,

3	Due to the water cooling the water consumption and and the pro-
	gramme duration increase .

Additional rinse cycle and water cooling

Additional rinse cycle and water cooling can be combined. Setting as for „Additional Rinse Cycle“ and „Water Cooling“.

44

Image 44

AEG 86740 manual Additional rinse cycle and water cooling, Cancel water cooling, Gramme duration increase

Contents

ÖKO-LAVAMAT 86740 update Dear customer Contents Remedying Faults What to do ifPage Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General Safety Disposal Environmental TipsDispose the packing material For polyoxymethylene, e.g. plastic clips Drawer for Washing Powder and Care Agent Unit DescriptionFront View Control Panel Programme knob Wool WOL, LAINE/ P Hand wash program Silk ZIJDE, SOIE/ P handwash Additional programme buttons PRE Wash VOORWAS, PRELAV. Pre wash/Soaking Programmable functions Two levels for other programmes Temperature Consumption values and time requirements Wash Time Display What does Update mean?Water Protection Aqua Control + Aqua Alarm Sorting and preparing a wash load Before the first washPreparing a Wash Load Types of washing and care symbols How much washing detergent and care agent? Water Softener Carrying out a wash cycle Brief instructionsAfter completion of the wash programme Open door, remove washing Setting the wash programme Change Spin Speed / Select Rinse Hold Setting the delay timer/soaking time Delay timer Soaking duration Opening and Closing the Filling Door Putting in the washing When using liquid washing agent/Tabs Add Washing Detergent/Care AgentCompartment for powdered washing agent/Tabs Compartment for pre-wash agent/soaking agent For a set delay time Starting the wash program Sequence of the programme Programme sequence displayMulti display Changing speed of spinning Wash cycle ended/Remove washing Remove washing Turn programme knob to OFF UIT, Arret Lights up, too much washing detergent was used Programme tables Wash Fashion Separate Rinsing/Conditioner/Starching/Impregnation Separate Spinning Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Cleaning the drain pump Before cleaning the drain pump What to do if Remedying FaultsAfter remedying the fault, press the button Been removed Conditioner has not Conditioner insert Rinsed, compartment No negative effect on If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation When all the washing solution has drained off Emergency Unlocking of the Filling DoorAid of the emergency unlocking facility Gency unlocking and remove the plug from the mains Set additional rinse cycle Additional rinse cycle RINCAGE+With more water Water cooling Cancel additional rinse cycleSetting water cooling Gramme duration increase Cancel water coolingAdditional rinse cycle and water cooling Set loose spin Cancel loose spinVariomatic-loose spinning Releasing the programme security Setting programme securityProgramme security Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting up and connection instructions Safety Instructions for Installation Setting Up the Unit Remove the Transport SafeguardWhen transporting the unit with a sack trolley Transporting the Unit Firmly pull both hose holders off the unit Supplied with the unit Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Technical Data DimensionsDelivery Heads over 1m Measurements in mm Guarantee conditions Belgium Guarantee conditions Customer services Page Page Index Service When do you incur costs even during the warranty period? AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG