AEG 86740 manual Conditioner has not Conditioner insert Rinsed, compartment

		Instructions for use
Problem	Possible cause	Remedy
Conditioner has not	Conditioner insert in the
rinsed, compartment	compartment for care agent	Clean detergent drawer, seat
æ for care agent is	is not properly placed on or	conditioner insert properly.
filled with water.	is blocked.
		Note maximum filling quan-
		tity (see programme tables).
Washing is badly	Probably too much washing	For easy-care textiles select
creased.	has been put in.	the EASY IRON (STRIJKVRIJ,
		SANS REPASSAGE) pro-
		gramme.
The washing has not	The washing was not able to	Always load the drum as ful
been spun as dry as	be distributed evenly in the	as possible with a combina-
usual.	drum prior to spinning.	tion of large and small items.
	There is a kink n the drainage	Remove kink.
	hose.
	Maximum pump height	Refer to the customer
		service. For pumping heights
	(emptying height 1m from
Washing is not spun.		over 1m, they have a supple-
	base surface of the appli-
Remaining water is vis-		mentary set as special spares
	ance) is exceeded.
		available.
iblein the drum.
Error code (2 appears.		Switch off appliance and pull
	Water pump is blocked.	out electric plug. Clean wa-
		ter pump.
	At the siphon connection: Si-	Clean siphon.
	phon is blocked.
	Door is locked for safety rea-	Wait till display DOOR/LIGHT
Door cannot be opened	sons (display DOOR/LIGHT is	(DEUR/LICHT, PORTE/ECLAIR.)
	Off).	lights up green.
when appliance is		Cancel programme security
switched on.	Programme security is
		(see section „Programme se-
	switched On.
		curity“).
	Water tap is not fully	Open water tap fully.
	opened.
Detergent remains
		Close water tap. Disconnect
form inthe washing	Filter in the socket of the in-
powder/liquid drawer.		inflow pipe from water tap
	flow hose at the water tap or	and from the appliance and
	the appliance is blocked.	clean filter.

37