AEG 86740 Wash cycle ended/Remove washing, Remove washing Turn programme knob to OFF UIT, Arret

Instructions for use

Wash cycle ended/Remove washing

After the wash programme has been ended, END (EINDE, FIN) is dis- played on the Programme cycle display.

•If programme EASY IRON (STRIJKVRIJ, SANS REPASSAGE) has been selected, then a crease guard programme of ca. 30 minutes is carried out after the programme end. The multi-display then additionally shows a rest time of 1 minute and the display END (EINDE, FIN) lights up. During the crease guard programme, the door can be opened at any time and the washing can be removed.

•If RINSE STOP (GEEN CENTR., SANS ESSOR.) has been selected, the display next to the

START/PAUSE (START/PAUZE, MARCHE /PAUSE) button blinks.

01. After a rinse stop, the water must first be pumped out:

–Either press the START/PAUSE (START/PAUZE, MARCHE /PAUSE) but- ton (water is pumped out and the washing is spun according to the position of the programme; with the RINSE STOP (GEEN CENTR., SANS ESSOR.) spin speed, the speed of spinning can also still be changed during spinning),

or

–Turn Programme knob to PUMP (POMPEN, VIDANGE) and press the START/PAUSE (START/PAUZE, MARCHE /PAUSE) button (the water is pumped off without spinning),

or

–Turn programme knob to SPIN (CENTRIFUG., ESSORAGE) or SHORT SPIN (KORT CENTRIFUG., ESSORAGE DELICAT) and press START/PAUSE (START/PAUZE, MARCHE /PAUSE) button (water is pumped out and

the washing is spun or short spun).

After the end of this programme step, the END (EINDE, FIN) display lights up.

2.Open filling door.

As soon as the display next to the DOOR/LIGHT (DEUR/LICHT, PORTE/ ECLAIR.) lights green, the door can be opened (not when the pro- gramme security is activated. For this see „Programme security„).

3.Remove washing.

4.Turn programme knob to OFF (UIT, ARRET).

27