Firmly pull both hose holders off the unit | AEG 86740 manual

Setting up and connection instructions

2.Firmly pull both hose holders off the unit.

3	The special button A and the plug
	caps B (2 ea.) and C (1 ea.) are

supplied with the unit.

3.Remove the screw D, including the compression spring with the special button A.

4.Close off the hole with the plug cap C.

Attention! Push in the plug cap so firmly that it engages in the rear panel (this protects the inside of the unit against splash water).

5.Unscrew the two screws E using the special button A.

6.Unscrew the four screws F using the special button A.

7.Remove the transport rail G.

8.Screw the four screws F back in.

9.Close off the two large holes with the plug caps B.

Attention! Push in the plug caps so firmly that they engage in the rear panel (this protects the inside of the unit against splash water).

50

Image 50

AEG 86740 manual Firmly pull both hose holders off the unit, Supplied with the unit

Contents

ÖKO-LAVAMAT 86740 update Dear customer Contents Remedying Faults What to do ifPage Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General Safety Dispose the packing material DisposalEnvironmental Tips For polyoxymethylene, e.g. plastic clips Drawer for Washing Powder and Care Agent Unit DescriptionFront View Control Panel Programme knob Wool WOL, LAINE/ P Hand wash program Silk ZIJDE, SOIE/ P handwash Additional programme buttons PRE Wash VOORWAS, PRELAV. Pre wash/Soaking Programmable functions Two levels for other programmes Temperature Consumption values and time requirements Wash Time Display What does Update mean?Water Protection Aqua Control + Aqua Alarm Sorting and preparing a wash load Before the first washPreparing a Wash Load Types of washing and care symbols How much washing detergent and care agent? Water Softener After completion of the wash programme Carrying out a wash cycleBrief instructions Open door, remove washing Setting the wash programme Change Spin Speed / Select Rinse Hold Setting the delay timer/soaking time Delay timer Soaking duration Opening and Closing the Filling Door Putting in the washing Compartment for powdered washing agent/Tabs When using liquid washing agent/TabsAdd Washing Detergent/Care Agent Compartment for pre-wash agent/soaking agent For a set delay time Starting the wash program Multi display Sequence of the programmeProgramme sequence display Changing speed of spinning Wash cycle ended/Remove washing Remove washing Turn programme knob to OFF UIT, Arret Lights up, too much washing detergent was used Programme tables Wash Fashion Separate Rinsing/Conditioner/Starching/Impregnation Separate Spinning Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Cleaning the drain pump Before cleaning the drain pump What to do if Remedying FaultsAfter remedying the fault, press the button Been removed Conditioner has not Conditioner insert Rinsed, compartment No negative effect on If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation Aid of the emergency unlocking facility When all the washing solution has drained offEmergency Unlocking of the Filling Door Gency unlocking and remove the plug from the mains Set additional rinse cycle Additional rinse cycle RINCAGE+With more water Water cooling Cancel additional rinse cycleSetting water cooling Gramme duration increase Cancel water coolingAdditional rinse cycle and water cooling Set loose spin Cancel loose spinVariomatic-loose spinning Releasing the programme security Setting programme securityProgramme security Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting up and connection instructions Safety Instructions for Installation When transporting the unit with a sack trolley Setting Up the UnitRemove the Transport Safeguard Transporting the Unit Firmly pull both hose holders off the unit Supplied with the unit Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Delivery Heads over 1m Technical DataDimensions Measurements in mm Guarantee conditions Belgium Guarantee conditions Customer services Page Page Index Service When do you incur costs even during the warranty period? AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG