Miele W 149 operating instructions Woollens Cold, Selecting a different Soak time

Programmable functions

Soak time

This is accessed for a programme by pressing the SOAK button on the fa- cia.

You can programme a soak time of:

-2 hours (factory setting) or

-1 hour 30 mins or

-1 hour or

-30 mins.

A "Soak time" of 2 hours is set at the factory. If you wish to change this stan- dard setting to one of the times listed above, you must first select program- ming mode.

Selecting programming mode

AThe machine must be switched off and the drum door closed. The programme selector must point to "Finish".

BPress the additional option buttons "Short" and "Water plus" at the same time and hold pressed in and:

C. . . switch the machine on with the "I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes in the sequence display.

Selecting the programmable function

To select the "Soak time" programmable function turn the programme selector to

-WOOLLENS Cold.

The "Rinse" indicator light comes on in the sequence display. This shows that a "Soak time" of 2 hours is currently se- lected (factory setting).

Selecting a different "Soak time"

By pressing the "START" button a vari- ous number of times you can select dif- ferent soak times. To confirm that a dif- ferent soak time has been selected, the previous indicator light goes out and a new indicator light comes on.

Each time "START" is pressed a differ- ent indicator light will come on. The in- dicator lights correspond to the 4 soak times available as follows:

2 hours = "Rinse"

1 hour 30 mins = "Rinse hold"

1 hour =	"Drain / Final spin"
30 mins =	"Finish"

Storing in memory

When you have selected the soak time you require, SWITCH the machine OFF with the "I-ON/0-OFF" button.

The "Soak time" you have selected is now stored in the machine’s memory.

37