Miele W 149 operating instructions Top-up rinse for Cottons, Starch Activating

Programmable functions

Top-up rinse for Cottons

At the end of the main wash addi- tional water flows into the drum and the suds are cooled down.

Hot suds can damage plastic drainage pipes.

Top-up rinse takes place when temper- atures of 95°C and 75°C are selected.

Top-up rinse should be activated:

–to prevent the danger of scalding if the drain hose is hooked over the edge of a sink or basin.

–where the drainage pipes do not comply with DIN 1986.

The washing machine is delivered with the Top-up rinse for Cottons deacti- vated.

Before the "Top-up rinse for Cottons" programmable function can be se- lected you must first select program- ming mode.

Selecting programming mode

AThe machine must be switched off and the drum door closed. The programme selector must point to "Finish".

BPress the additional option buttons "Short" and "Water plus" at the same time and hold pressed in and:

C. . . switch the machine on with the "I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes in the sequence display.

Selecting the programmable function

To select the "Top-up rinse for Cottons" programmable function turn the programme selector to -

Starch ***.

Activating

To activate "Top-up rinse for Cottons" press the "START" button once.

The "Rinses" light comes on in the se- quence display.

Storing in memory

To store the "Top-up rinse for Cottons" programmable function in the memory SWITCH the machine OFF with the "I-ON/0-OFF" button.

The "Top-up rinse for Cottons" program- mable function is now stored in the ma- chine’s memory.

Deactivating

If the "Top-up rinse for Cottons" pro- grammable function is no longer re- quired it can be deactivated. To do so repeat the procedure given above from point A as far as the *** shown above. Press the START button and the "Rinses" indicator light will go out. The function is now deactivated. Store in memory by pressing the "I-ON/0-OFF" button.

39