Activating the icompartment
This function should be activated if
traditional "big box" detergents are
used. For the first 10 seconds of the
main wash cycle water flows in
through compartment i.
Compartment jmay sometimes not
be able to hold the total amount of de-
tergent required when:
- the water is very hard (over 3.8
mmol/l, water hardness level IV) and
- the washing is heavily soiled.
In this case compartment ican be
used to flush in the extra detergent for
the main wash.
Before the "Activating the icompart-
ment" programmable function can be
selected you must first select program-
ming mode.
Selecting programming mode
AThe machine must be switched off
and the drum door closed. The
programme selector must point to
"Finish".
BPress the additional option buttons
"Short" and "Water plus" at the same
time and hold pressed in and:
C. . . switch the machine on with the
"I-ON/0-OFF" button.
DLet go of all these buttons.
The indicator light "Main wash" flashes
in the sequence display.
Selecting the programmable function
To select the "Activating theicom-
partment" programmable function turn
the programme selector to
-Silk 30 °C ***.
Activating
To activate "Activating theicompart-
ment" press the "START" button once.
The "Rinses" light comes on in the se-
quence display.
Storing in memory
To store the "Activating theicompart-
ment" programmable function in the
memory SWITCH the machine OFF with
the "I-ON/0-OFF" button.
The "Activating the icompartment"
programmable function is now stored in
the machine’s memory.
Deactivating
To deactivate the use of Compartment
irepeat the procedure given above
from point Aas far as the *** shown
above. Press the START button and the
"Rinses" indicator light will go out. The
function is deactivated. Store in mem-
ory by pressing the "I-ON/0-OFF" but-
ton.
Programmable functions
36