Installation

Removing the transit fitting

^Unscrew the 4 outer screws marked A completely.

^Unscrew the 4 screws marked B. These screws must then be left on the transit bars.

^Plug the 4 large holes with the caps supplied.

The transit fitting together with screws should be stored in a safe place for future use. It must be re-fit- ted if the machine is to be moved again.

Re-fitting the transit fitting

To refit the transit fitting reverse the pro- cedure described above.

^Remove the transit bars.

54

Page 54
Image 54
Miele W 149 operating instructions Removing the transit fitting, Re-fitting the transit fitting