Installation
Connection to the drainage system
The machine drains via a drain pump with a delivery head of 1 metre.
The drain hose is 1.5 m long. It must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull.
Drain hose connection:
^Direct into a sink: Hook the hose over the edge and secure. Make sure that the water can flow freely to avoid flooding and to prevent water from being sucked back into the machine.
^Connected securely to a floor gully.
^Connected securely to a standpipe.
^Connected securely to a plastic drain pipe with a rubber nipple. There is no need to use a
If required, the drain hose can be ex- tended to a length of 5 m. The neces- sary parts can be purchased from the Miele Spare Parts Department or your Miele dealer.
56
