Programmable functions

Memory function

If an additional option is selected for a programme, and / or the spin speed is altered, the machine stores these changes in memory at the start of a programme.

The memory function is not active when the machine is first delivered but can be programmed to active.

Activating

First select programming mode.

Selecting programming mode

AThe machine must be switched off and the drum door closed. The programme selector must point to "Finish".

BPress the additional option buttons "Short" and "Water plus" at the same time and hold pressed in and:

C. . . switch the machine on with the "I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes in the sequence display.

Activating the programmable func- tion

To activate the "Memory" programmable function turn the programme selector to Separate rinse ***.

To activate the "Memory" function press the START button once. The rinses light comes on in the Sequence display.

Storing in memory

To store this setting in memory SWITCH the machine OFF with the "I-ON/0-OFF" button.

Deactivating

To deactivate the memory function re- peat the procedure given above from point A as far as the *** shown above. Press the "START" button and the "Rinses" indicator light will go out. The function is now deactivated. Store in memory by pressing the "I-ON/0-OFF" button.

40

Page 40
Image 40
Miele W 149 operating instructions Memory function, Activating the programmable func- tion