Programmable functions
Maximum water level | Selecting the programmable function |
The water level for rinsing is automat- ically raised to the maximum level where rinse results are particularly important.
It is effective for the rinses in the follow- ing programmes:
-COTTONS
-MINIMUM IRON
-QUICK WASH
-MIXED WASH - Poly/Cottons
Before the "Maximum water level" pro- grammable function can be selected you must first select programming mode.
Selecting programming mode
AThe machine must be switched off and the drum door closed. The programme selector must point to "Finish".
BPress the additional option buttons "Short" and "Water plus" at the same time and hold pressed in and:
C. . . switch the machine on with the
DLet go of all these buttons.
The indicator light "Main wash" flashes in the sequence display.
To select the "Maximum water level" programmable function: turn the programme selector to - DELICATES 40 °C ***.
Activating
To activate "Maximum water level" press the "START" button once.
The "Rinses" light comes on in the se- quence display.
Storing in memory
To store the "Maximum water level" pro- grammable function in the memory SWITCH the machine OFF with the
The "Maximum water level" programma- ble function is now stored in the ma- chine’s memory and is effective in the programmes described above until such time as you may wish to deacti- vate it.
Deactivating
To deactivate the use of a maximum water level in the rinses repeat the pro- cedure given above from point A as far as the *** shown above. Press the START button and the "Rinses" indicator light will go out. The function is now de- activated. Store in memory by pressing the
33
