ZyXEL Communications 28641 user manual

∙None - No authentication required.

3.PPP Options: Mutual Authen. - Some vendors, e.g. Cisco, implement a type of mutual authentication. That is, the node that initiates the call will request a user name and password from the far end that they are dialing to. If the Remote Node that is dialing in implements this type of authentication, set this field to Yes.

4.PAP Login - This field will only be enabled if the Mutual Authen. field is set to Yes. Enter in the login name to be used to respond to the far end’s PAP authentication request. This field does not apply to CHAP authentication.

5.PAP Password - This field will only be enabled if the Mutual Authen. field is set to Yes. Enter in the PAP password to be used to respond to the far end’s authentication request. This field does not apply to CHAP authentication.

6.Multiple Link Options: Max Trans Rate - Enter the maximum data transfer rate between your Prestige and the Remote Dial-in User. The unit is in bits per second. There are two options for this field:

∙64 - At most, one B channel will be used.

∙128 - A maximum of two channels can be used.

When the Prestige calls back to the Remote Dial-in User the maximum data transfer rate is always 64.

7.Callback Budget Management: Allocated Budget (min) - This field will set a budget callback time for all the Remote Dial-in Users. The default for this field is 0 for no budget control.

8.Callback Budget Management: Period (hr) - This field will set the time interval to reset the above callback budget control.

9.Dial-In IP Address Supplied By: Dial-in User - If set to Yes, it tells the Prestige to allow a remote host to specify its own IP

Dial-In Configuration 65