ZyXEL Communications 28641 user manual Menu 12.2 Edit IPX Static Route

Figure 8-6 Menu 12.2 - Edit IPX Static Route

1.Server Name - In this field, enter in the name that has been configured for the server. This name must be the exact name configured in the NetWare server.

2.Network # - This field contains the internal network number of the remote server which you wish to access. Do not use 00000000 or FFFFFFFF for this field.

3.Node # - This field contains the address of the node on which the server resides. If you are using a Novell IPX implementation, this value is 000000000001.

4.Socket # - This field contains the socket number on which the server will receive service requests. The default for this field is hex 0451.

5.Type # - This field identifies the type of service the server provides. The default for this field is hex 0004.

6.Gateway Node - In this field, enter the number (1-4) of the Remote Node that is linked to this static route. That is, the Remote Node that you wish to route the packet to.

The Hop Count and Tick Count fields have the same meaning as those in the Remote Node Setup.

Novell IPX Configuration 87