ZyXEL Communications 28641 user manual Remote Node Configuration

17.Telco Options: Transfer Rate - This field (which only applies to outgoing calls) controls the rate at which the data is transferred between your Prestige and the Remote Node. The options for this field are:

∙64K - The Prestige will place 64Kbps (bits per second) digital data calls. (Default)

∙Modem - The Prestige will place Modem data calls.

∙X.75 - (for the DSS1 and 1TR6 only) The Prestige will place X.75 digital data calls.

∙V.120 - (for the DSS1 and 1TR6 only) The Prestige will place V.120 digital calls.

∙56K - (For the North America only) The Prestige will place 56Kbps digital data calls.

∙DOVBS - (For the North America only) The Prestige will place 56Kbps Data Over Voice Bearer Service (DOVBS) call. Some phone companies in North America charge less if calls are made using DOVBS.

18.Telco Options: Allocated Budget (min) - This field will set a budget outgoing call time for the Remote Node. The default for this field is 0 for no budget control.

19.Telco Options: Period (hr) - This field will set the time interval to reset the above outgoing call budget control.

20.Session Option: Input Filter Sets, Output Filter Sets and Call Filter Sets - In these fields, select which filter set(s) you would like to implement to filter the incoming and outgoing traffic between this Remote Node and the Prestige. You can choose from 12 different filter sets. In addition, you can link up to 4 filter sets together for further customization (e.g., 1, 5, 9, 12). Note that spaces and , are accepted in this field.

56 Remote Node Configuration