Editing PPP Options

Figure 5-3 Remote Node PPP Options

1.Encapsulation - Select CCP (Compression Control Protocol) for the PPP or MP link. There are two options in this field.

Standard PPP - Standard PPP options will be used.

CISCO PPP - Cisco PPP options will be used.

2.Compression - Turn on the Stac Compression. The default for this field is Off.

3.Multiple Link Options: BOD Calculation - Select the direction of the traffic you wish to calculate in order to determine when to add or subtract a link. The default for this field is Transmit or Receive.

4.Multiple Link Options: Base Trans Rate - Select the base data transfer rate for this Remote Node. This parameter is in kilobits per second (Kbps). There are two options for this field:

64 - Only one channel will be used.

128 - Two channels will be used when a packet triggers a call.

Remote Node Configuration 59

Page 73
Image 73
ZyXEL Communications 28641 user manual Editing PPP Options, Remote Node PPP Options