5.Multiple Link Options: Max Trans Rate - Enter the maximum data transfer rate allowed for this Remote Node. This parameter is in kilobits per second. There are two options for this field:

64 - At most one channel can be used.

128 - A maximum of two channels can be used.

6.Multiple Link Options: Target Utility - Enter the two thresholds separated by a - for subtracting and adding the second channel. The default is 32-48.

7.Multiple Link Options: Add Persist - This parameter specifies the number of seconds there traffic is above the adding threshold before the Prestige will bring up the second channel. The default is 5 seconds.

8.Multiple Link Options: Subtract Persist - This parameter specifies the number of seconds where traffic is below the subtraction threshold before the Prestige drops the second channel. The default is 5 seconds.

Once you have completed Menu 11.2 - Remote Node PPP Options, press ENTER at the message: Press ENTER to Confirm ... to confirm your selections, or press ESC to cancel your selections.

60 Remote Node Configuration

Page 74
Image 74
ZyXEL Communications 28641 user manual Remote Node Configuration