select Yes, the Prestige will perform a loop-back test to check the ISDN line. If the loop-back test fails, note the error message that you receive and take the appropriate troubleshooting action.

Figure 3-10 ISDN Loop-Back Test Screen

Ethernet Setup

Menu 3 is used to enter Ethernet related information. Depending on the protocols (TCP/IP or IPX) on your LAN, you will need to configure each protocol separately.

General Ethernet Setup

This menu determines the type of Ethernet interface you are using as well as the filter sets you wish to implement to monitor your Ethernet traffic. From Menu 3 - Ethernet Setup, enter 1 to go to menu 3.1 - General Ethernet Setup.

36 Installation

Page 50
Image 50
ZyXEL Communications 28641 user manual General Ethernet Setup