CARTON CONTENTS
The followingparts are shipped loose with your cleaningsystem:
•Main Unit
High Pressure Hose (already attached to pump)
•Parts Box (which includes items listed below)
•Spray Gun
•Dual Lance with quick connect nozzle fitting
•Engine Oil
•
•Four
•Manual Bag (which includesthe items listed below)
•Owner'sManual
•Nozzle Cleaner Kit
•"O"--RingKit
•Tank Labels
Become familiar with each piece before assembling
the cleaning system. Check all contents against the illustrationon Page 5. If any parts are missingor
damaged, call the Pressure Washer Helpline at
TO REMOVE CLEANING SYSTEM FROM CARTON
•Remove loose parts and parts box included with your cleaningsystem.
•Slice two corners at guide handle end of carton
from top to bottom so the panel can be folded down flat.
Uft the handle to upright position and slide the locking caps Into place
•Raise guide handle, secure in place.
Roll the cleaningsystem out the open end of the carton.
•Check carton for additionalloose parts.
HOW TO SET UP YOUR CLEANING SYSTEM
For the mostpart, your CraftsmanHigh Pressure Cleaning System has been assembledat the facton]. You must, however, assemblethe spray gun, and attachthe high pressurehose to the spraygun.
•Cut the tie wraps on the highpressurehose and connecthighpressure hoseto gun. Tightenby hand.
Attach dual lance to spray gun.
•Place assembled spray gunon holder.
4
